switched hot
When I put in My amp and Cd Player I used a wiring harness to do the wiring. It had a Remote lead on it and I just tapped it. Everything else hits this wire, Both amps and crossover. I just daisy chained it.
Hey man, on my truck, (see sig.) it was the black with pink stripe. Just go or it man...it'll work. Just keep your fingers crossed.
-AR
------------------
2001 F-150 XLT 4X4 Off-Road, S/C, FS, Black[*] 4.6L Triton V8 (Romeo, 20 HP Increase)[*] 5 Speed / 3:55 Reg. Axle[*] Keyless[*] Premium Audio CD
Mods.[*] K&N Cold Airbox / Throttle Body Mod.[*] Flowmaster 40 (3" x 20" "Turn-Down") [*] Cranked Torsion Bars[*] APC XENON PLASMA Super Whites[*] Bugshield[*] Bedliner[*] Ventshades[*] "Light Argent" 4X4 Off-Road Decals[*] K&N & Flowmaster Stickers (Under the Hood)[*] Rockford Fosgate G360A2 Punch Amp.[*] JL 12W3-D2 (JL ProWedge Box)
Build Date: 8/23/00 (Kansas City Plant)
arobbins@mail.liberty.k12.mo.us
-AR
------------------
2001 F-150 XLT 4X4 Off-Road, S/C, FS, Black[*] 4.6L Triton V8 (Romeo, 20 HP Increase)[*] 5 Speed / 3:55 Reg. Axle[*] Keyless[*] Premium Audio CD
Mods.[*] K&N Cold Airbox / Throttle Body Mod.[*] Flowmaster 40 (3" x 20" "Turn-Down") [*] Cranked Torsion Bars[*] APC XENON PLASMA Super Whites[*] Bugshield[*] Bedliner[*] Ventshades[*] "Light Argent" 4X4 Off-Road Decals[*] K&N & Flowmaster Stickers (Under the Hood)[*] Rockford Fosgate G360A2 Punch Amp.[*] JL 12W3-D2 (JL ProWedge Box)
Build Date: 8/23/00 (Kansas City Plant)
arobbins@mail.liberty.k12.mo.us
Hey Jackal,
where exactly is that wire you are talking about? I'm using the stock head unit, so no remote wire.
Jamie
[This message has been edited by Junk Yard Dog (edited 11-12-2000).]
where exactly is that wire you are talking about? I'm using the stock head unit, so no remote wire.
Jamie
[This message has been edited by Junk Yard Dog (edited 11-12-2000).]
Do you have the tools to take your factory head out? If not, get some, if you do...pull it out, disconntect both harnesses, and strip the tape back from the larger harnesss. You'll find a black wire with a pink stripe on it. That's what you'll want to tap into. Also, do you plan on using a line level converter, high level inputs, or RCA's? I can help you find the wires on a Super Cab to tap into if you are using the high level input on the amp.
-AR
-AR
Fuses box.
did it with my interior neons.
wrap the wire around the fuse and put back in for a quikey.
------------------
99.5 red lightning
Cervini's ram air hood
billet grilles
clear coreners
clear tail's
A.R.E bed cover
SS street style mirror's
Super chip R9
airaid intake
trans go shift kit
Audio: Kenwood 9015 cd, Kenwood kmd minidisc, Kicker 5x7 impulse, kicker 5.25 resolution, phoenix gold zx450, Phoenix gold zx500, Three JL audio 10w3's, Qform's, custom built box.
Built 5/4/99 A tuesday
# 917 of 4000
Best ET. 13.42 at 100.98
best stock 13.96 at ?
When the green light drops, the bullsh*t stops.
did it with my interior neons.
wrap the wire around the fuse and put back in for a quikey.
------------------
99.5 red lightning
Cervini's ram air hood
billet grilles
clear coreners
clear tail's
A.R.E bed cover
SS street style mirror's
Super chip R9
airaid intake
trans go shift kit
Audio: Kenwood 9015 cd, Kenwood kmd minidisc, Kicker 5x7 impulse, kicker 5.25 resolution, phoenix gold zx450, Phoenix gold zx500, Three JL audio 10w3's, Qform's, custom built box.
Built 5/4/99 A tuesday
# 917 of 4000
Best ET. 13.42 at 100.98
best stock 13.96 at ?
When the green light drops, the bullsh*t stops.
hey guys,
thanks for the info. I'll use RTKILLA's suggestion till the weekend and then I'll pull the radio out again. I checked it once but it was dark, in a hurry, you know how it goes.
Jamie
thanks for the info. I'll use RTKILLA's suggestion till the weekend and then I'll pull the radio out again. I checked it once but it was dark, in a hurry, you know how it goes.
Jamie


