Need advice on dampening for an install
Thread Starter
|
Member
Joined: Apr 2005
Posts: 69
Likes: 0
From: North North NORTH Arkansas
Need advice on dampening for an install
Ok, here's the basic deal. I'm installing some of the stuff I already had on hand in my 2004 Ford F150 STX regular cab.
- KAC-729 amp
- 10" Kenwood sub in QLogic Box
- 4 Pioneer speakers
I will be installing the speakers myself, and most likely, I will let the audio shop install the amp/amp wiring, because let's face it - if THEY screw it up, they pay for it.
That shouldn't cost too much; after that, I will have 80 or so bucks left over. What I'd like to know is, where would it best be spent on dampening material? I'd like to do at LEAST the doors.
- KAC-729 amp
- 10" Kenwood sub in QLogic Box
- 4 Pioneer speakers
I will be installing the speakers myself, and most likely, I will let the audio shop install the amp/amp wiring, because let's face it - if THEY screw it up, they pay for it.
That shouldn't cost too much; after that, I will have 80 or so bucks left over. What I'd like to know is, where would it best be spent on dampening material? I'd like to do at LEAST the doors.
