Solobarics in a custom box in our trucks?
Thread Starter
|
Senior Member
Joined: Aug 2002
Posts: 713
Likes: 0
From: Wall, New Jersey
1400 watts to each one are they 10's or 12's seems like a little much for10s but i could be wrong if they are 10s how can u run that much without blowing them?
Vinny
02 Red L
Vinny
02 Red L
Senior Member
Joined: Jul 2002
Posts: 513
Likes: 0
From: Downey, CA
Originally posted by EvilGuy
I love the JBL 1200.1s They go for 250 on ebay and deliver 1400watts at 14.4 volts
only down side is that if you run ported you will need a subsonic filter.
I love the JBL 1200.1s They go for 250 on ebay and deliver 1400watts at 14.4 volts
only down side is that if you run ported you will need a subsonic filter.
-Monty
Senior Member
Joined: Nov 2000
Posts: 6,713
Likes: 0
From: Orland Park, IL just south of chicago
I'm running 1 12" L7 with about 1200 watts of juice and its pretty good.
Plan on running two 10" L7's in the truck with 1500 watts of juice. should be more then enough when there only rated at 600 watts RMS.
Plan on running two 10" L7's in the truck with 1500 watts of juice. should be more then enough when there only rated at 600 watts RMS.
Senior Member
Joined: Apr 2000
Posts: 718
Likes: 0
From: College Station, TX
Joe, when I had them in a sealed box with one JBL on them it wasn't enough. It sounded much much better with one jbl on each. But when I ran a ported box I ran them at rms. And yes I had two of JBLs.
