is 93 octane enough for a 2lb pulley? i just want to make sure
and what injector cleaner do you guys recommend?

thanks for the input
Gaven

 

With no chip a two pounder seams fine down to about 91 if you have to. 92 or 93 works fine. I have had 5 reburns on a top tuners chip and I still can not seam to get a chip that will not ping above 80 degrees or run on anything less than 93 Shell. It has been a real pain in the rear.

Hope this helps

Andy

2000L with 36100 miles (we can talk about mods now)