Lightning

not your avg chip and pulley question.

Thread Tools
 
Search this Thread
 
Old Oct 21, 2002 | 08:11 PM
  #1  
run4bux's Avatar
Thread Starter
|
Member
Joined: Jun 2002
Posts: 76
Likes: 0
From: Hell
not your avg chip and pulley question.

Guys what would my truck run like with a 6lber and a chip for an 8? It should be safe but will the performance suffer that much to matter? If so I would get it re-burned but if not I will probaly just wait till I get It Dynoed.
Stan
 
Reply
Old Oct 21, 2002 | 09:00 PM
  #2  
run4bux's Avatar
Thread Starter
|
Member
Joined: Jun 2002
Posts: 76
Likes: 0
From: Hell
...anyone?...
 
Reply
Old Oct 21, 2002 | 09:42 PM
  #3  
red00Lightning's Avatar
Senior Member
Joined: May 2002
Posts: 457
Likes: 0
From: Arlington,Tx
It will just run rich...it will hurt performace a little bit, but not the truck. I would get the dyno and then get it reburned to your dyno.

--wes
 
Reply
Old Oct 21, 2002 | 09:48 PM
  #4  
ICULOKN's Avatar
Senior Member
Joined: Oct 2001
Posts: 4,815
Likes: 0
From: Richmond,VA
Just get a 6lber and a PSP chip. Beefcake and myself have over 28k miles each with no problems. We both have drove all over the East Coast racing as well.
 
Reply
Old Oct 22, 2002 | 06:48 AM
  #5  
Rob_02Lightning's Avatar
Senior Member
Joined: Mar 2002
Posts: 11,153
Likes: 0
From: Selden NY
run4bux,

I'll let you know in two days. I have a 2 Upper and a 4 Lower but with my recent plug eating issue, I'm going to go back to the Stock Size Upper, and tune it down 2 lbs. My Chip is burned for 6 Lb's of extra Boost , so I'll be assured to run richer with only 4lbs, and can safely go back to WOT. With the new Denso's IT22's, which are colder than the old TR6's, I'll have even more Insurance.

Don't know what to expect in performance but I'll let you know.

I also have my old chip with an extremly mild program on it,
JUST IN CASE.
 
Reply
Old Oct 22, 2002 | 09:04 AM
  #6  
run4bux's Avatar
Thread Starter
|
Member
Joined: Jun 2002
Posts: 76
Likes: 0
From: Hell
Thanks Rob02 that will work out great.
 
Reply




All times are GMT -4. The time now is 01:45 AM.