OMG. MagnaFlow Catback Sounds Awesome!
Senior Member
Joined: Mar 2001
Posts: 1,352
Likes: 0
From: CORAL SPRINGS, FL. USA
Edward- All the Magnaflow fade inward a bit on the front most pipe. I sent a set back because of that and the new set did the same thing. If you play with it it gets a little bit better, but I do notice that my tips are a bit closer together than ****'s. Magnaflow better get with it!
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Originally posted by Mondo1
Edward- All the Magnaflow fade inward a bit on the front most pipe. I sent a set back because of that and the new set did the same thing. If you play with it it gets a little bit better, but I do notice that my tips are a bit closer together than ****'s. Magnaflow better get with it!
Edward- All the Magnaflow fade inward a bit on the front most pipe. I sent a set back because of that and the new set did the same thing. If you play with it it gets a little bit better, but I do notice that my tips are a bit closer together than ****'s. Magnaflow better get with it!
I know this isn't the best quality pic( I blew up a old pic.
These are 4 inch Magnaflow Tips
where can I buy the magnaflow cat back, and for how much!
Senior Member
Joined: Mar 2001
Posts: 1,352
Likes: 0
From: CORAL SPRINGS, FL. USA
Don- Actually they are welded together with a peice of stainless stock about 8 inches back. It just seems that some are welded closer than others. they need a bit better quality control.(or a new welder)
Thread Starter
|
Banned
Joined: Jun 2002
Posts: 3,508
Likes: 0
From: Huntington Beach/CA
Re: where can I buy the magnaflow cat back, and for how much!
Originally posted by BOXER
Where, can I get that system and how much does it cost!
Where, can I get that system and how much does it cost!
Senior Member
Joined: Feb 2002
Posts: 4,922
Likes: 1
From: Lexington, KY
Originally posted by Mondo1
Don- Actually they are welded together with a peice of stainless stock about 8 inches back. It just seems that some are welded closer than others. they need a bit better quality control.(or a new welder)
Don- Actually they are welded together with a peice of stainless stock about 8 inches back. It just seems that some are welded closer than others. they need a bit better quality control.(or a new welder)
Wish they left at least a little room ... <grin>
Originally posted by 02thunder
Kevin, drop it man, there is only 4 or 5 people on F150online that
are supposed to make solid gains with anything. And if you don't
follow them, forget it, you get razzed.
Nice kit! See ya on the other boards...
joe
Kevin, drop it man, there is only 4 or 5 people on F150online that
are supposed to make solid gains with anything. And if you don't
follow them, forget it, you get razzed.
Nice kit! See ya on the other boards...
joe
I hear ya, Joe ...
Cliff
Member
Joined: Aug 2002
Posts: 26
Likes: 0
That was done in the parking lot of the Home Depot
A little sand paper and a can of rustolium spray paint.
I had posted some pics of my traction bars last year and everyone jumped all over me for my rusty diferential cover. So I took care of it.
I know this one is way off topic but i was wondering how this works and how much
By the way I swear the Magna Flow gives at least 15-18 hp u can really feel it but it doesnt matter
A little sand paper and a can of rustolium spray paint.
I had posted some pics of my traction bars last year and everyone jumped all over me for my rusty diferential cover. So I took care of it.
I know this one is way off topic but i was wondering how this works and how much
By the way I swear the Magna Flow gives at least 15-18 hp u can really feel it but it doesnt matter