Just wanted to see how many of you guys out there have used a G-tech on your trucks. They're pretty reliable... however, I hear the 1/4 mile mph is about 5mph fast. Anyway, how many of you w/ mods have checked out what your 0-60 or stopping distance is? If so, please post and what mods you have... man these trucks are fun! There really isn't much that can keep up w/ us to 60. (or any other speed for that matter!!!)

 

0-60 with G-tech 4.4 sec. Mods are 2# lower pulley, single program PSP chip, T/B, JL air intake..... I took the G-tech in the truck at the dragstrip..ran a 13.11 and G-tech said 13.10. MPH on G-tech was about 6MPH higher than track MPH.

 

5.2.
Mods are extra heavy right shoe w/custom organic impulse feathering device. Sorry not for sale, it's one of a kind.

 

Damn... 4.4 that's awesome... anyone out there with any better times than these?! Keep em comin'!

 

I wanna G-tech my truck and see what is says.... I would expect somewhere around 4.4 aswell... or should I not?

-Mike

 

I have used my g tech twice at the track and both times the 1/4 E.T. were exact! mph was 5mph higher on the g tech. The key to getting accurate results in the 1/4 (the only thing I have tested so far) is by plugging in the correct weight of your vehicle and having the unit set up correctly.....just my .02 worth.


DAVE

True Blue 02'

 

Is there a way to calculate your 0-60 by using you 1/4 mile times?

 

Nope....because you could launch like mad to 60 but pull slowly thru the 1/4.

 

Awesome... anyone do better than 4.4??? That's a pretty respectable number...

 

The 4.4 was done with a VERY light feather foot. I was also running numerous 4.5's 4.6's........to a 5.5 spinning the tires... I can only imagine what I could run with mashing the throttle from a standstill.

 

on slicks

 

Ive heard that L's that are lowered, with graphics--oversized spoilers, garbage can exhaust, oriental writing on the doors and NAWZ...runs 4.0!

 

I use a tazzo not g tech and the wieght of the truck is not used only for h/p readings have tried it with 1 pound in and 9000 pounds and the 1/4 mile times are same.

 

chip and filter Gtech said my 0-60 was 5.1 spinning

 

I ran a 4.33 on a G-tech and 12.57 in the 1/4 .The mph was about 5 high every time.The e.t. was accurate to .05 sec.I ran 4 passes at Cecil County.