NOS - NOZsle System install
Thread Starter
|
Member
Joined: Apr 2002
Posts: 85
Likes: 0
From: Texas
NOS - NOZsle System install
Here is a photo of our updated nitrous system, the NOSzle on the IC tank gets installed under the fuel injector for direct cylinder injection. The braided lines from above the distribution block go to a nozzle in the intake to help cool the charge.
Still have to put the injector NOSzles in and run the lines.
more updates in a day or so
jb
Still have to put the injector NOSzles in and run the lines.
more updates in a day or so
jb
Last edited by avdawg; Jul 10, 2002 at 02:42 PM.
Banned For Rules Violations
Joined: Mar 2001
Posts: 1,585
Likes: 0
From: Mobile, AL, USA
YIKES YIKES YIKES!!!
Is that TEFLON TAPE I see there installed?
NO NO NO!!! NEVER USE THAT ON N20 FITTINGS!!!
Wanna talk about CLOGGING up! (take it from me, I learned the HARD way!)
Teflon Paste baby, paste!!! Read your NOS manual, as it states this in there too!
Teflon tape should not be used because it requires relatively more torque to properly seal. This could cause damage to the NOS fittings and nozzles. Teflon could also break loose and become lodged in the nitrous or fuel solenoids, or solenoid filters. This can cause engine damage or failure.
Other than that, BAD ***!!! WAY FRIGGIN' COOL!
NO NO NO!!! NEVER USE THAT ON N20 FITTINGS!!!
Wanna talk about CLOGGING up! (take it from me, I learned the HARD way!)
Teflon Paste baby, paste!!! Read your NOS manual, as it states this in there too!
Teflon tape should not be used because it requires relatively more torque to properly seal. This could cause damage to the NOS fittings and nozzles. Teflon could also break loose and become lodged in the nitrous or fuel solenoids, or solenoid filters. This can cause engine damage or failure.
Other than that, BAD ***!!! WAY FRIGGIN' COOL!
Last edited by BfB; Jul 10, 2002 at 02:55 PM.
Banned For Rules Violations
Joined: Mar 2001
Posts: 1,585
Likes: 0
From: Mobile, AL, USA
Originally posted by avdawg
nope no tape, my buddy just put it too far up the threads, I havent cleaned it up yet!!!k
nope no tape, my buddy just put it too far up the threads, I havent cleaned it up yet!!!k
I did the ones past the solenoids
Later man...oh, and BAD *** yet again!
Senior Member
Joined: Aug 1999
Posts: 5,438
Likes: 1
From: Palm Coast, FL
Hey Avdawg, looks sweet, keep us updated on the progress.
One word of caution though, keep an eye on those plastic lines. I know 3 people running the Noszle setup on the Mustangs, and all 3 have had to replace the lines several times so far from cracking. Might want to try to find something to replace them with.
One word of caution though, keep an eye on those plastic lines. I know 3 people running the Noszle setup on the Mustangs, and all 3 have had to replace the lines several times so far from cracking. Might want to try to find something to replace them with.
Senior Member
Joined: Sep 2001
Posts: 4,342
Likes: 0
From: Motor City
JKTrending Topics
Thread Starter
|
Member
Joined: Apr 2002
Posts: 85
Likes: 0
From: Texas
Clearence for the fuel rails, that is next to work on, it looks like the passenger side will work without to much trouble, the driver side looks like it is gonna be a pain in the A%$ !!! But ill let ya know
Sal,
I remember you mentioned that before, I have the stuff comming to remake them with steel braided line. Thanks for the reminder.
...what someone stole my battery!!!!! ohhh noooo
jb
Sal,
I remember you mentioned that before, I have the stuff comming to remake them with steel braided line. Thanks for the reminder.
...what someone stole my battery!!!!! ohhh noooo
jb
Last edited by avdawg; Jul 10, 2002 at 04:25 PM.