what next?
Thread Starter
|
Member
Joined: Mar 2002
Posts: 13
Likes: 0
From: nebr.
what next?
i got a chip from jim at jdl,what next?was wondering what size of lower pully i should get?a 2 or 4.what do ya think with just a j49 chip in it ,what will it do now?through the quarter.and adding the pully?everything else is stock.2001 lightning
Senior Member
Joined: Nov 2001
Posts: 767
Likes: 0
From: Central AZ
You should expect to see a 3-5 tenths improvement.
I'd do the Factory Tech valve body mod, then the Truck Tracks traction bars. Not necessarily in that order, but definately before any other power adders. Put down what you have more efficiently before you add more. These trucks feel SO MUCH stronger with just chips, the valve body, and traction bars.
Seems silly to me to put that big ol' 6# pully on there when your tranny still shifts slushy as hell and you're roasting the hell out of the tires with the stock pully. You can always add it later when you can actually FEEL the extra boost and not just hear it.
I'd do the Factory Tech valve body mod, then the Truck Tracks traction bars. Not necessarily in that order, but definately before any other power adders. Put down what you have more efficiently before you add more. These trucks feel SO MUCH stronger with just chips, the valve body, and traction bars.
Seems silly to me to put that big ol' 6# pully on there when your tranny still shifts slushy as hell and you're roasting the hell out of the tires with the stock pully. You can always add it later when you can actually FEEL the extra boost and not just hear it.
