1/8 mile time
Re: 1/8 mile time
Originally posted by LatemodelRacer2
What is a good time for a 01 L with a JDm flip chip, TR5's, K&N Air filter/air box mod,no hitch. on the 1/8. Im hoping low 8's
What is a good time for a 01 L with a JDm flip chip, TR5's, K&N Air filter/air box mod,no hitch. on the 1/8. Im hoping low 8's
Good luck but I'm thinking 8.60 or 8.70 in 90 degree weather with humidity high.
I ran 8.19 w/1.83 60' @85mph with just:
M/T E-T streets, K&N Panel Filter ( BOX ), Sean Hyland upper pulley, and Autologic chip custom tuned on the dyno at Panhandle Performance...Truck made 380HP/476ft.lbs TQ @ normal operating temp. when it ran the 8.19!!!!!
Chikin@Charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
410HP/503ft.lbs @ Normal Temp. w/o N2O
JL Logocaps w/Keychain
JL 3# Lower Pulley
Sean Hyland 2# Upper Pulley
JDM Cold Air
JDM Boost Bypass
JDM/Accufab Throttle Body
JDM Longtubes w/ Silver-Bullet cat-back
JDM Cobra R pump
My Eletric Fan w/Help of JDM
PSP 4-Way Autologic Chip ( Tow, Street,Track, N20 )
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Truck-Traks
PSP Nitrous Plate
Nitrous Express 50-150 Kit ( Can’t decide which jets to use )
NGK / TR6’s ( .040gap )
Hoosier DOT’s 28 x 10 x 16
M/T E-T streets, K&N Panel Filter ( BOX ), Sean Hyland upper pulley, and Autologic chip custom tuned on the dyno at Panhandle Performance...Truck made 380HP/476ft.lbs TQ @ normal operating temp. when it ran the 8.19!!!!!
Chikin@Charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
410HP/503ft.lbs @ Normal Temp. w/o N2O
JL Logocaps w/Keychain

JL 3# Lower Pulley
Sean Hyland 2# Upper Pulley
JDM Cold Air
JDM Boost Bypass
JDM/Accufab Throttle Body
JDM Longtubes w/ Silver-Bullet cat-back
JDM Cobra R pump
My Eletric Fan w/Help of JDM
PSP 4-Way Autologic Chip ( Tow, Street,Track, N20 )
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Truck-Traks
PSP Nitrous Plate
Nitrous Express 50-150 Kit ( Can’t decide which jets to use )

NGK / TR6’s ( .040gap )
Hoosier DOT’s 28 x 10 x 16


