Hello all,
A couple weeks ago I had the Belltech 3/4 kit installed, which came out to be a 2/4 drop. My question is, can the rear be lifted by 1 Inch maybe? Right now it bottoms out a lot and I was thinking if I lifted it to a 3 drop instead of 4, i wouldnt have to do a C-notch. thanks.

 

All you have to do is move the rear shackels up to the middle notch. You come out to a 2/3 drop then.....

 

ICULOKN

Do you happen to know if with a 3'' drop on the back, will it still bottom-out?

 

Never say never, but you'll have about 3"-4" between the bumpstops...