Lightning

jacking it back up

Old Mar 16, 2002 | 03:03 AM
  #1  
Blown00''s Avatar
Thread Starter
|
Senior Member
Joined: Nov 2000
Posts: 114
Likes: 0
From: Parts unknown
jacking it back up

how hard will it be to take out a drop kit and put the factory stuff back on?

u know in case u wanna sell it or something.

Chris
 
Reply
Old Mar 16, 2002 | 03:40 AM
  #2  
The Orphaner's Avatar
Registered User
Joined: Dec 2001
Posts: 414
Likes: 0
From: Teays Valley, WV
Hey Blown00....easier than getting it lowered. Since then you will already have the rivet on the rear hangers out and all your dealing with it nuts and bolts everywhere.
 
Reply
Old Mar 16, 2002 | 12:21 PM
  #3  
Spike Engineering's Avatar
Senior Member
Joined: Aug 2000
Posts: 1,723
Likes: 1
From: NorCal
Re: jacking it back up

Originally posted by Blown00'
how hard will it be to take out a drop kit and put the factory stuff back on?

u know in case u wanna sell it or something.

Chris
It depends on the kit you install. Some kits can be installed without touching the rivets.

Spike
 
Reply
Old Mar 16, 2002 | 02:23 PM
  #4  
JBLsilver01's Avatar
Senior Member
Joined: Apr 2001
Posts: 595
Likes: 0
From: Conroe TX
I have a 1-2 drop w/shackles and springs, and I kept the stock parts including the cam bolt kits so putting it back to stock would be easy. You would have to get it re-aligned also.
 
Reply
Old Mar 16, 2002 | 02:26 PM
  #5  
hmustang's Avatar
Senior Member
Joined: May 1999
Posts: 3,188
Likes: 3
From: Kansas side of the greater KC area
It shouldn't be all that hard to do.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:38 PM.