01's with blown motors...
01's with blown motors...
To everyone that has a 2001 Lightning and has had a motor break, can you post your build date? I want to see if there is a pattern. No Tuner or mod info needed, just the build date of the truck please....
Originally posted by Skank Dog
Where is this "sticker" at on the engine that gives build date?
Where is this "sticker" at on the engine that gives build date?
Trending Topics
Have a few questions:
Being that the last thread that I asked them in, got locked, maybe I'll try them here. Being that we're talking about blown motors and all.
I'm contimplating a Diablo chip with a 2.80" blower pulley. And upgraded plugs as well I guess. I've heard many horror stories on blown engines/rods, etc. So I really don't want to go crazy with upping the boost levels.
-Just wanting to know if that set up of chip & pulley will be OK on my '01 'L'?? -Has there been anyone with troubles with that setup?
-What kind of boost increase numbers will I be looking at?
I'm kinda new with the modding of a s/c engine. Just want to do my homework before I possibly blow something up.
Also, I was told if I go with those mods, I should get myself an air/fuel meter, Stoichmeter. Which runs directly off the 02 sensor for reltime metering. Green=good. Red=bad(lean). Haven't heard anyone with this.
Thanx all.
Being that the last thread that I asked them in, got locked, maybe I'll try them here. Being that we're talking about blown motors and all.
I'm contimplating a Diablo chip with a 2.80" blower pulley. And upgraded plugs as well I guess. I've heard many horror stories on blown engines/rods, etc. So I really don't want to go crazy with upping the boost levels.
-Just wanting to know if that set up of chip & pulley will be OK on my '01 'L'?? -Has there been anyone with troubles with that setup?
-What kind of boost increase numbers will I be looking at?
I'm kinda new with the modding of a s/c engine. Just want to do my homework before I possibly blow something up.
Also, I was told if I go with those mods, I should get myself an air/fuel meter, Stoichmeter. Which runs directly off the 02 sensor for reltime metering. Green=good. Red=bad(lean). Haven't heard anyone with this.
Thanx all.
Originally posted by Zeus Lightning
Have a few questions:
Being that the last thread that I asked them in, got locked, maybe I'll try them here. Being that we're talking about blown motors and all.
I'm contimplating a Diablo chip with a 2.80" blower pulley. And upgraded plugs as well I guess. I've heard many horror stories on blown engines/rods, etc. So I really don't want to go crazy with upping the boost levels.
-Just wanting to know if that set up of chip & pulley will be OK on my '01 'L'?? -Has there been anyone with troubles with that setup?
-What kind of boost increase numbers will I be looking at?
I'm kinda new with the modding of a s/c engine. Just want to do my homework before I possibly blow something up.
Also, I was told if I go with those mods, I should get myself an air/fuel meter, Stoichmeter. Which runs directly off the 02 sensor for reltime metering. Green=good. Red=bad(lean). Haven't heard anyone with this.
Thanx all.
Have a few questions:
Being that the last thread that I asked them in, got locked, maybe I'll try them here. Being that we're talking about blown motors and all.
I'm contimplating a Diablo chip with a 2.80" blower pulley. And upgraded plugs as well I guess. I've heard many horror stories on blown engines/rods, etc. So I really don't want to go crazy with upping the boost levels.
-Just wanting to know if that set up of chip & pulley will be OK on my '01 'L'?? -Has there been anyone with troubles with that setup?
-What kind of boost increase numbers will I be looking at?
I'm kinda new with the modding of a s/c engine. Just want to do my homework before I possibly blow something up.
Also, I was told if I go with those mods, I should get myself an air/fuel meter, Stoichmeter. Which runs directly off the 02 sensor for reltime metering. Green=good. Red=bad(lean). Haven't heard anyone with this.
Thanx all.
Totaled,
I am feeling the same way, I have had 3-6 of extra boost for awhile and 100's of 1/4 mile passes with no problems.
Bob,
I dont think you have a worry, ANYTHING built on 6/13 is going to be rock solid!! LOL My truck was built on that dad and I was born on that day!!
My build date is 5-3-01 and I have all the mods listed installed save for the NX kit which will find it's way onto my truck next week!!! No problems so far...We'll see next week!!!
Chikin@Charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
Sean Hyland 2# Upper Pulley
JL 3# Lower
JDM Cold Air
JDM Boost Bypass
JDM/Accufab Throttle Body
JDM Longtubes w/ Silver-Bullet cat-back
JDM Cobra R pump
My Eletric Fan w/Help of JDM
PSP 4-Way Autologic Chip ( Tow, Street,Track, N20 )
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Truck-Traks
PSP Nitrous Plate
Nitrous Express 50-150 Kit ( Can’t decide which jets to use )
NGK / BR7 spark plugs .036gap
Hoosier DOT’s 28 x 10 x 16
Chikin@Charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
Sean Hyland 2# Upper Pulley
JL 3# Lower
JDM Cold Air
JDM Boost Bypass
JDM/Accufab Throttle Body
JDM Longtubes w/ Silver-Bullet cat-back
JDM Cobra R pump
My Eletric Fan w/Help of JDM
PSP 4-Way Autologic Chip ( Tow, Street,Track, N20 )
PSP FactoryTech Valvebody
PSP Deep Tranny Pan
PSP DriveShaftLoop
PSP Truck-Traks
PSP Nitrous Plate
Nitrous Express 50-150 Kit ( Can’t decide which jets to use )

NGK / BR7 spark plugs .036gap
Hoosier DOT’s 28 x 10 x 16
Originally posted by Zeus Lightning
Have a few questions:
I'm contimplating a Diablo chip with a 2.80" blower pulley. And upgraded plugs as well I guess. I've heard many horror stories on blown engines/rods, etc. So I really don't want to go crazy with upping the boost levels.
-Just wanting to know if that set up of chip & pulley will be OK on my '01 'L'?? -Has there been anyone with troubles with that setup?
-What kind of boost increase numbers will I be looking at?
I'm kinda new with the modding of a s/c engine. Just want to do my homework before I possibly blow something up.
Also, I was told if I go with those mods, I should get myself an air/fuel meter, Stoichmeter. Which runs directly off the 02 sensor for reltime metering. Green=good. Red=bad(lean). Haven't heard anyone with this.
Thanx all.
Have a few questions:
I'm contimplating a Diablo chip with a 2.80" blower pulley. And upgraded plugs as well I guess. I've heard many horror stories on blown engines/rods, etc. So I really don't want to go crazy with upping the boost levels.
-Just wanting to know if that set up of chip & pulley will be OK on my '01 'L'?? -Has there been anyone with troubles with that setup?
-What kind of boost increase numbers will I be looking at?
I'm kinda new with the modding of a s/c engine. Just want to do my homework before I possibly blow something up.
Also, I was told if I go with those mods, I should get myself an air/fuel meter, Stoichmeter. Which runs directly off the 02 sensor for reltime metering. Green=good. Red=bad(lean). Haven't heard anyone with this.
Thanx all.
First if all I am pretty sure that the 2.8" upper offers 2# of boost over stock. With that, can I suggest running a 2# lower instead. For one it is an easier install and two you won't have to worry about belt slippage due to the small cantact area.
Secondly in regards to the A/F gauge, there are hundreds of us that have them. However they are nothing more than a cool light show except maybe during WOT runs then they can give some desent info. Mine is the bottom gauge........

--Joe


