me want to dyno L
You can dyno whenever you want ,but I would wait about a 1000 or 2000 miles for break in.It cost about $75-$100 depending on who does it. If you can get in on a dyno day with a group it would probaly be cheaper.
Not familiar with area but give a speed shop in the area a call .They might help.
Tips on dynoing-Make sure you get SAE numbers and AIR/FUEL numbers.Also check pressure in rear tires and make sure the same (28 p.s.i).Have them make the pull in third gear O/D off.Also get the motor as cool as possible.Get there early if possible open hood and let sit.
Hope this helps.
See my sig for my numbers
VINNIE
Not familiar with area but give a speed shop in the area a call .They might help.
Tips on dynoing-Make sure you get SAE numbers and AIR/FUEL numbers.Also check pressure in rear tires and make sure the same (28 p.s.i).Have them make the pull in third gear O/D off.Also get the motor as cool as possible.Get there early if possible open hood and let sit.
Hope this helps.
See my sig for my numbers
VINNIE
I'm going back to Panhandle Performance (its in Panama City, FL) on 3-28-02 if you want to come I can have your truck dynoed for $75 for 3 pulls or tuned on the dyno for about $600, maybe less if you come w/me!!!
E-mail me with your thoughts!!!
CHIKIN@charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
K&N Box Filter
Sean Hyland Upper Pulley
JDM Boost Bypass
Panhadle Performance/ Autologic Chip
380 RWHP@ Normal Temp.
476 RWTQ@ Normal Temp.
MickeyThompson ET-Streets
PSP Electric fan&CobraR water pump
NGK / BR7 spark plugs
PSP Longtubes w/Twin Magnaflow
FactoryTech Valvebody (Next Month)
JL 3# Lower (next month)
E-mail me with your thoughts!!!
CHIKIN@charter.net
---------------------------
Black '01
Born on 5-3-01
#3603 of 6381
K&N Box Filter
Sean Hyland Upper Pulley
JDM Boost Bypass
Panhadle Performance/ Autologic Chip
380 RWHP@ Normal Temp.
476 RWTQ@ Normal Temp.
MickeyThompson ET-Streets
PSP Electric fan&CobraR water pump
NGK / BR7 spark plugs
PSP Longtubes w/Twin Magnaflow
FactoryTech Valvebody (Next Month)
JL 3# Lower (next month)



