How do you fit the things?
How do you fit the things?
I've finnally reached the end of what I'm willing to spend on my truck... So To polish her off I'm just going to Kick in a nitrous system however while researching I've come across the problem of where the heck would i put a 15lbs bottle of brain candy? (Besides the bed) Nitrous and a new MAF.... Also how are the L's running aftermarket boost and N2O doing? Any of them blow up?
I think there is enough room for 15Lbs bottle in the cab. Another thing you will have to consider is haveing a blow down tube, if you put it in the cab.
You should beable to run a wet 50 shot with no problems with the 2Lbs lower. But just remember that you will make more power and put more stress on the motor.
You should beable to run a wet 50 shot with no problems with the 2Lbs lower. But just remember that you will make more power and put more stress on the motor.
Just curious why you wouldn't put it in the bed.
Besides the safety considerations, I don't see enough room for the mounting hardware. That's an awful big bottle....
Besides the safety considerations, I don't see enough room for the mounting hardware. That's an awful big bottle....
Mine is behind the driver's seat on top of the black storage box thing. I like the seat up close so you guys with long legs I could see that being a problem with the fit. I have a NX 25 lb bottle back there. The local shop put two lighted rocker-style switches (one for nitrous activation & one for heater) between the steering wheel & headlight controls...looks like it came from the factory that way. I just got the heater installed & I highly reccommend getting one. If not, when it's cold you will get NO bottle pressure. I can take some pictures tonight if that will help you.


