4lb pulley and stock plugs
Member
Joined: Dec 2001
Posts: 25
Likes: 0
From: Palm Springs, Cal.
You guys have me confused.
I have a JDM flip chip and I am about to install a 4# pulley, I posted this to JDM and they said, I don't need a re-burn or new plugs.
Jim is one of the three main tuners, why would he say that if there was even the possibility of problems?
I have a JDM flip chip and I am about to install a 4# pulley, I posted this to JDM and they said, I don't need a re-burn or new plugs.
Jim is one of the three main tuners, why would he say that if there was even the possibility of problems?
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 1,237
Likes: 0
well jim told me that i needed to reburn my chip for the 4lb pulley, but that i didn't need to get new plugs because i'm only running 91 octane gas. But i thought i would be safe and get new plugs anyway.
and by the way i usually go with jdm, but i wanted desno plugs and jdm doesn't sell them
David
and by the way i usually go with jdm, but i wanted desno plugs and jdm doesn't sell them
David
