Scmc/gafba Fall Drag Day, Jackson Sc
Junior Member
Joined: Nov 2001
Posts: 2
Likes: 0
From: Woodruff, SC
well...
HP is GREAT (old config is 851RWHP (TQ not readable) but I've got to get some seat time. My first pass at the track with her I did 11.5 at 134mph ON STOCK MICH PILOTS. And then smoked the clutch (getting it out of the shop today) then its off to get 300 wuss miles on her before this weekend.
Can't wait to try out my "new" config. If I don't get 10.8 on mich pilots at a MUCH better MPH I'll NOT be happy.
ScottP
Can't wait to try out my "new" config. If I don't get 10.8 on mich pilots at a MUCH better MPH I'll NOT be happy.
ScottP
Senior Member
Joined: Sep 2000
Posts: 342
Likes: 0
From: Grayson, GA
I'm goin' to try and make it. Having never raced before, it aught to be a blast. I'd bring my Slv '01 and hopefully talk a buddy into coming with his red '00. That'd make 7 & 8.
I too have a question about the helmet, I take it I should go ahead and get one? Sell them there or what? What about driveshaft loop and all that?
I'll be coming from the ATL area down I-20. What's the schedule looking like? I don't plan on staying the night.
Sorry for all the questions. Just unsure of what to expect.
I too have a question about the helmet, I take it I should go ahead and get one? Sell them there or what? What about driveshaft loop and all that?
I'll be coming from the ATL area down I-20. What's the schedule looking like? I don't plan on staying the night.
Sorry for all the questions. Just unsure of what to expect.
Senior Member
Joined: Apr 2001
Posts: 946
Likes: 0
From: Over yonder somewhere
They have got helmets at the track (older on that don't look very stylish but they work).
Tenativly looks like we will be starting at 11:00 at the track. You can keep an eye here and on the following link. As soon as it's final, we'll post something.
http://www.svtcobraclub.com/svtbbs2/....php?forumid=2
Tenativly looks like we will be starting at 11:00 at the track. You can keep an eye here and on the following link. As soon as it's final, we'll post something.
http://www.svtcobraclub.com/svtbbs2/....php?forumid=2
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 1,929
Likes: 0
From: Augusta, GA
I'm ready to Rumble, Let's get it on!!! 
See you there and praying for cool air!!!
I'm running on 18 inch tire's this weekend, So I'm ready to burn some rubber on the F1's...
Had to send the first set of 20 inch chrome 01's that I received today, back to the plater. Had a few too many blemishes for myself. He said he would personally check the next set, before sending, so I have to wait on a new set..
See you there and praying for cool air!!!
I'm running on 18 inch tire's this weekend, So I'm ready to burn some rubber on the F1's...
Had to send the first set of 20 inch chrome 01's that I received today, back to the plater. Had a few too many blemishes for myself. He said he would personally check the next set, before sending, so I have to wait on a new set..
Member
Joined: Aug 2001
Posts: 36
Likes: 0
From: Dacula, GA
Re: Good Racin' guys.......
Originally posted by LIGHTNINROD
No joke now--I hope everybody get's a new 'best' and 12s for everyone!
Dan
No joke now--I hope everybody get's a new 'best' and 12s for everyone!
Dan
I'm lookin' forward to seeing everyone on Saturday!
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 1,929
Likes: 0
From: Augusta, GA
Hey you guys,
Some of us L owners are going to meet around 9:00 AM Sat. morning at MGW before going to the track. George at MGW is going to give us a tour of his facility. He makes CNC machined aluminum accesssories for our L's, mustangs and other makes and models..
Shoot me an E-Mail and I'll give you directions , be kinda neat to have all the L's meet and then go to the track..It's not to far out of the way from his shop to the track.
www.mgwltd.com/
See ya,
DL
Some of us L owners are going to meet around 9:00 AM Sat. morning at MGW before going to the track. George at MGW is going to give us a tour of his facility. He makes CNC machined aluminum accesssories for our L's, mustangs and other makes and models..
Shoot me an E-Mail and I'll give you directions , be kinda neat to have all the L's meet and then go to the track..It's not to far out of the way from his shop to the track.
www.mgwltd.com/
See ya,
DL
Senior Member
Joined: Apr 2001
Posts: 946
Likes: 0
From: Over yonder somewhere
Plan for the day
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 1,929
Likes: 0
From: Augusta, GA
Directions from Atlanta Area
We are all going to meet at MGW at around 9:30 AM Sat..
Start: Depart Atlanta, Georgia
1. I-20 East to Augusta, GA
2: At I-20 Exit 196A/I-520 Exit, Go East (Bush Field Airport exit also)
3: On I-520, take SR-56 (Mike Padgett Highway, I think, Exit 7) At stop Light, end of exit ramp, Turn RIGHT (South) for 5.1 miles to MGW.
MGW located on Right side of SR-56 (Mike Padgett Highway).
MGW, 4159 Mike Padgett Hwy, Augusta, GA,
IF you see International Paper on your Left on SR-56, A big paper mill, you went to far.
MGW: (706) 793-1770
See you there, have a safe trip,
DL
Start: Depart Atlanta, Georgia
1. I-20 East to Augusta, GA
2: At I-20 Exit 196A/I-520 Exit, Go East (Bush Field Airport exit also)
3: On I-520, take SR-56 (Mike Padgett Highway, I think, Exit 7) At stop Light, end of exit ramp, Turn RIGHT (South) for 5.1 miles to MGW.
MGW located on Right side of SR-56 (Mike Padgett Highway).
MGW, 4159 Mike Padgett Hwy, Augusta, GA,
IF you see International Paper on your Left on SR-56, A big paper mill, you went to far.
MGW: (706) 793-1770
See you there, have a safe trip,
DL