Slow passenger window ........
My passenger window almost stops in the middle when in the down mode.
I sprayed dry lube on the tracks, it worked for about 20 mins, any ideas ?
FRITZ, Stock Silver 2001 "L"
I sprayed dry lube on the tracks, it worked for about 20 mins, any ideas ?
FRITZ, Stock Silver 2001 "L"
My driver's window get hung up every so often. I spray silicone lube on the tracks with the straw provided with the can. Roll the glass all the way down and stick the straw down along the track as far as it will go.
I dropped mine off this am... Forgot to pull the chip... So I pulled the chip and replaced the plastic cover in the Service drive...
The Taurus Im driving is way tooo small for me....
Ill let you know what they find.
They cannot associate the chip and window. However I didnt want them to find it "by accident" and document it for later
Doug
The Taurus Im driving is way tooo small for me....
Ill let you know what they find.
They cannot associate the chip and window. However I didnt want them to find it "by accident" and document it for later
Doug
Doug,
Did you also reset the PCM ?
Didnt someone a while back say they could find out about the chip if it's pulled, and the PCM was not reset.
Did you also reset the PCM ?
Didnt someone a while back say they could find out about the chip if it's pulled, and the PCM was not reset.
Trending Topics
No Spiro - I didnt have the guts to pop the hood and disconnect the battery. THe service drive is lined with windows withall the service writers looking right at me...
For a window motor there should be NO reason to hook up the computer to diagnostics. I had Sals 4 way switch and a spare Superchip in the glove compartment. I just wanted things to look right .....
My Service writer is cool ... He knows I have the website and he knows I race... I just wanted to make his job easier...
Doug
For a window motor there should be NO reason to hook up the computer to diagnostics. I had Sals 4 way switch and a spare Superchip in the glove compartment. I just wanted things to look right .....
My Service writer is cool ... He knows I have the website and he knows I race... I just wanted to make his job easier...
Doug
They just called and said they aligned the tracks on both sides and lubed them... If it works and I can get the details i will pass them along
Ok after testing the window works fine. I looked at the tracks myself, but looking at the number of window issues on this forum and others I bet the Ford guys know how to fix this in thier sleep
Doug
Ok after testing the window works fine. I looked at the tracks myself, but looking at the number of window issues on this forum and others I bet the Ford guys know how to fix this in thier sleep
Doug
Last edited by Silver_2000; Oct 1, 2001 at 08:29 PM.
"Pulled chip in service drive." LOL I took my first place trophy from last Friday nite to my dealership this morning to show the boys while I was making an appointment to get my MERCON V changed in my tranny. (50K this is my second change so it has MERCON V in it because thats what we put in it last time). They loved the trophy! Remove mods, not at my dealership. Wish you had one like mine.

noelvm
Don't forget to lube the top part of the channel all the way up to the top of the door. You may have to remove the door panel and check lower attachment points of side rails to make sure they are straight and tight. (my tech recommends Litium grease in the spray can)

noelvm
Don't forget to lube the top part of the channel all the way up to the top of the door. You may have to remove the door panel and check lower attachment points of side rails to make sure they are straight and tight. (my tech recommends Litium grease in the spray can)
Last edited by noelvm; Oct 1, 2001 at 11:17 PM.
I thought it was only me....
mine gets really slow, but worse when it's cold than it is when it's warm. my passenger window sucks, too, man, I need to get it working right again, so pass along anything you find out. Thanks!
mine gets really slow, but worse when it's cold than it is when it's warm. my passenger window sucks, too, man, I need to get it working right again, so pass along anything you find out. Thanks!


