I need someone who is more or less mechanically inclined, (or willing ot pay for a mechanic to install a valve body) who has a 2001 Lightning, one with a chip (strongly prefer PSP) and one without, the closer to bone stock the better. Best of all is someone near Cincinnati so I can install it myself, and add a meter so I can see inside the box when it's running. I have the new design accumulator and I want to test a few, I'll need your old core back eventually, but you can drive it until you feel comfortable with it. The problems I've had have been evident from the install so if you get it around a day or two it should be fine. IF IT DOESN'T WORK RIGHT YOU HAVE TO TAKE IT BACK OUT RIGHT AWAY and send it back.

I have one in a test trcuk right now, will have one or two more within a few days, but I need one more with a chip and one without. When it's all done you get to keep the accumulator on me.

This is a test, and while I'm pretty sure it's gonna work and I'm almost positive that if it doesn't you still won't hurt your tranny, you do assume some risk, if you're near Cincinnati, I'll install it myself.
Let me know,

G

[This message has been edited by Factory_Tech (edited 06-10-2001).]

 

Only 2001's? What are the benefits of the new setup?

------------------
2000 Silver Lightning 13.16 (so far)
PSP 4-way
PSP Filter Kit
PSP Lower Pulley
Level 10 Shift kit
F-250 Trans pan
MagnaFlow 12468
Snug-Lid

I feel a 12.xx coming on.

Team PSP West

 

Factory_Tech...
I'm in Norman,Ok.
2001L. Bone stock!
Talked to Sal the other night about your set-up. Yes, i'm interested!
E-mail me!
Miceye@aol.com
Albert

ps...I don't have your e-mail address!

[This message has been edited by A-Lightning (edited 06-10-2001).]

 

Silver Bolt,
It's functionally similar to the Level 10 kit you have, so you wouldn't benefit from it.
I've done a lot of them for '99s and '00s with no problems, but the setup I was using didn't work well with the 2 '01s that we tried so I changed some of the valves and spring settings, and I want to see how the new setup works on the '01s. It's just a test, I think I have a better setup now but I want to put a few laps on them and make sure they're gonna work allright.
A Lightning, check your mail.

Thanks
G

 

Well, I could sure use one to try

------------------
SAL - TEAM PSP
web- www.powersurgeperformance.net
E-mail sales@powersurgeperformance.net
tech@powersurgeperformance.net
F-150 Online Supporting Vendor

 

I have a 2001 with the PSP chip and would install and test.

Let me know.

 

Factory_Tech

Please see Steve about becoming a Supporting Vendor.

Thread closed in deference to the Vendor Rules
https://www.f150online.com/f150board/faq.html#vendor

Thanks Doug