Everyone,

As I thought when I installed the pro-sport, the LED light must have been put on by a 1st grader. I was washing burnt rubber (How'd that get there ) off the back side yesterday and noticed that the LED was coming loose...


It appears that the glue is just coming right off. I'm not sure if its caused by vibration from driving...Force impact from closing....or just cheap adhesive...

Anyway, if anyone has experienced this, please let me know what type of adhesive you used to repair it with.

PS...JL...That IS your truck in the pro-sport photo shoot...Have you checked your garage lately???

Thanks

------------------
Brian K
kimmel_brian@prc.com
thedink@ix.netcom.com

99.5 Black - Born 5/17/99

• "Full Trim" Club
• 13.28 @ 102.31 (8.52 @ 83.84) Street tires & 93 octane
• 12.97 @ 105.18 (8.30 @ 84.68) MT's & 100 octane
• Appearance Mods: Tinted Windows, Clear Corners, Bed Rug, Street Scene Grilles, Pro-Sport Lid, Autometer "Phantom" Boost Gauge
• Performance Mods: JL Stage 2 intake, JL Ram Air, JL Street/Strip FlipChip, FRP Single Blade TB, NGK TR-6's, Electric I/C Fan, MT ET Streets 26x11.5x16's
• Sound Mods: Alpine Audio w/MB Quart Components(F) & Pioneer(R) speakers
• Misc: Tow Package, Mobil 1 5W-30
• Coming Soon: ???

Foolish man give wife grand piano, wise man give wife
upright organ

 

Oh, the LED is about the ONLY problem I have not had yet with my Pro-Sport. I did receive a phone call from Innovation and they are going to cover the body shop bill for the finish repair. I do owe them a thank you for that.

Later,
Jake...

------------------
2000 Black Lightning
#54 of 4966
NLOC #476
PSP full meal deal
Level 10 shift kit
Innovation Pro-Sport lid
BedRug
Wet Okole seat covers
AIM 2" rear drop

13.870 @ 100.52 stock
13.087 @ 104.80 mods

jacobs@revealed.net

 

havent had a problem with mine yet..

i suggest you pull the light out, clean the old glue off & reglue it with silicon.
i think thats what they used.

brooks