Does anyone know the part # for the back bracket for the computer. It's the back bracket right where the chip goes in underneath the dash on the passenger side. The bracket is about 8 inches by 1.5 inches, its got the little lip and the plastic clip to hold the back end of the computer. Had to modify mine cause of the chip(want to be able to put original back in for any warranty concerns). The small town dealer(pop. 1500) can't seem to find the right #. It would be the same # for all F150 97 to 01. Thanks for any help!!!

------------------
01L,Lowered, Black,Downey SST,Straight Pipes,Chipped........ Toy: 91 Heritage Softtail Classic/Lowered



[This message has been edited by cabraco (edited 04-22-2001).]

 

I am curious as what chip you used, that you had to modify the bracket. I didn't have to do anything to the bracket in my 99 when installing a chip.

------------------
2001 Silver Bolt...
Adopted 3/24/01...
Red Line Water Wetter... Wet Okole's... Bedrug... JL Ram Air...
Chipless in NJ

 

I just installed JDM's chip and had to bend the lip over also.

------------------
2001 Red Lightning Born 02/24/01
Mods:
JDM Street Chip, JDM 12" Big Mouth Filter, Cervini’s Ram Air Hood, A.R.E. LSII With Led Wing & Carpet, Valentine One Radar Detector, Bed Rug, Haig Industries MBZ-Velour floor mats, Colquitt Machine Hitch Cover, G-Tech/Pro, Very Cherry Wet Wax.

 

You have to bend the lip over or drill new holes in the bracket to move it back about a quarter inch to offset the thickness of the chip, or the chip won't sit flat on the back of the computer( the chip hits the lip on the bracket)

------------------
01L,Lowered, Black,Downey SST,Straight Pipes,Chipped........ Toy: 91 Heritage Softtail Classic/Lowered