For those of you who have moved the CD changer under the passenger seat, where did you get the different bracket to do this with? Did you purchase a new one, if so from whom? Or did you make a new one, and if so here, out of what? Aluminum?

Thanks in advance!
Eric

 

Eric,

I moved my changer to the stock location and removed the storage bins. I had to modify the brackets on the changer itself, but when I upgrade my truck, I can take the changer without any damage to the current truck. The stock unit will bolt back in easily. (couldn't mount under the seat because my amp and DSP unit is under there.

------------------
00' Lightning/ Black
99' Lightning/ Red
94' Lightning/ Red
96' Cobra Convert/ Red
98' Yamaha R1
R6 Race bikes

 

Don't need no brackets. I just stuck mine under the middle and put a piece of velcro on it and it sticks to the carpet. No problemo.
noelvm


------------------

"ANYTHING OTHER THAN 1ST, SUCKS" (D.Earnhardt)
99.5 Red Ligntning, Mobil 1, PRO-M 80 MM MAF/filter, Custom Superchip, Eldebrock 5512 muffler, CAL TRACS, MT ET Streets, best time (1/8) 8.19, Bugflector II, G&H Lens covers head & fog, 200 WT Pioneer 4 CH AMP, BOSE 301 SERIES IV SPEAKERS (IN BACK)LONESTAR RACEWAY 2000 ROOKIE OF THE YEAR (AT 56)
70 Vette LS-6 454 (gathering dust in the garage)

 

i put a different cd player & cd changer in my truck. i used a flat piece of brass to make a plate for the changer to be mounted on, then mounted the plate to the floor.







------------------
brooks
'00 silver "L"
member NLOC #496

my zing albums - _-click here-_

clonetek@jam.rr.com

 

Sears Hardware store has 90 degree brackets that have holes already drilled that match the CD changer perfectly.

------------------

• 2001 Lightning (WHITE)
• 2001 SuperCrew (RED)
• '90 Pro Street Mustang GT 1/4 7.50ET@185MPH.
• '23T Altered 1/4 8.90ET@150MPH.
  2001Bolt@group1320.com

http://www.group1320.com