I just received a PSP filter intake.
I am having a little trouble with the air temp sensor. It is a really tight fit in the metal psp tube. I can get it into position ok but it will not turn and lock in. Should I force it with grips etc? Also I was told to replace the o ring with a smaller one. Is this what you guys have done? Any help would be appreciated. I just want to hear that howl!!!!

 

bttt

 

I just took the pliers and turned it enough(maybe 1/8th turn) to secure it in the hole. Was afraid of breaking the ears off of the sensor.

------------------
Red '00 Lightning,
Power Surge Performance enhanced,
Sound effects provided by Flowmaster,
375 RWHP,
445 RWTQ,
13.227@103.55
Track Videos

 

Take a small file and file the back side of
the ears to make them a little thinner. Just
enough that it will allow you to turn it with
a good tight fit. You may have to reinstall
the factory box one day and you don't want
the sensor to be loose if this happens.

 

Thanks for the help.