ATTN BABolt - need some info
Thread Starter
|
Senior Member
Joined: Jan 2000
Posts: 753
Likes: 0
From: TX
ATTN BABolt - need some info
BABolt
I read in an old post that you have used a linear actuator to raise your Lo-Pro lid. Do you have any info on which model you used, pics of setup? Thanks.
------------------
2000 Black Lightning, Snuglid
Custom Bed Carpet
Clear Corners, Lightning banner
Tinted Windows, Custom air intake
2" drop, VTech Taillight covers.
NLOC #377
See pics of '00BlackLightning at:
http://www.zing.com/album/?id=4294555843
I read in an old post that you have used a linear actuator to raise your Lo-Pro lid. Do you have any info on which model you used, pics of setup? Thanks.
------------------
2000 Black Lightning, Snuglid
Custom Bed Carpet
Clear Corners, Lightning banner
Tinted Windows, Custom air intake
2" drop, VTech Taillight covers.
NLOC #377
See pics of '00BlackLightning at:
http://www.zing.com/album/?id=4294555843
Senior Member
Joined: Aug 1999
Posts: 1,247
Likes: 0
00BlackL
As you saw in the other thread the source is select products. www.selectproducts.com . You need to use the longest one that they have to offer. I think that they have three lengths. You can make them remote controled by using a multi function remote start. With this type of devise you can raise and lower the windows and the lid on your pickup bed too. Now just add neon lighting and a mirrored Lightning Logo to the underside of the lid. It could look good. I toyed with the idea of red neon lighting reflecting off of the polished nitrous bottles in my bed but then said enough is enough.
------------------
BABolt
SVT#290
As you saw in the other thread the source is select products. www.selectproducts.com . You need to use the longest one that they have to offer. I think that they have three lengths. You can make them remote controled by using a multi function remote start. With this type of devise you can raise and lower the windows and the lid on your pickup bed too. Now just add neon lighting and a mirrored Lightning Logo to the underside of the lid. It could look good. I toyed with the idea of red neon lighting reflecting off of the polished nitrous bottles in my bed but then said enough is enough.
------------------
BABolt
SVT#290
Thread Starter
|
Senior Member
Joined: Jan 2000
Posts: 753
Likes: 0
From: TX
BABolt
Thanks for the info. A couple more questions if you don't mind. Did you use one per side? Did you have to use any levers for additional torque multiplication? Any pics. Thanks again.
------------------
2000 Black Lightning, Snuglid
Custom Bed Carpet
Clear Corners, Lightning banner
Tinted Windows, Custom air intake
2" drop, VTech Taillight covers.
NLOC #377
See pics of '00BlackLightning at:
http://www.zing.com/album/?id=4294555843
Thanks for the info. A couple more questions if you don't mind. Did you use one per side? Did you have to use any levers for additional torque multiplication? Any pics. Thanks again.
------------------
2000 Black Lightning, Snuglid
Custom Bed Carpet
Clear Corners, Lightning banner
Tinted Windows, Custom air intake
2" drop, VTech Taillight covers.
NLOC #377
See pics of '00BlackLightning at:
http://www.zing.com/album/?id=4294555843