HALO Burger & Fries night
Thread Starter
|
Member
Joined: May 2000
Posts: 86
Likes: 0
From: Houston, TX, USA
HALO Burger & Fries night
I was wondering how many of the HALO guys are going to the burger and fries night tonight at Sonic on Dairy Ashford south of I-10.
I will probably be going and was thinking of bringing some tools to install my PSP chip.
What tools will be needed? The only worry I have is making sure that I get the contacts totally clean.
Well if any are going we could have a small project.
Would it be better to do at thew house? I heard it was a simpple process. Do I really need to take the back of the computer off in order to clean the contacts properly?
I will probably be going and was thinking of bringing some tools to install my PSP chip.
What tools will be needed? The only worry I have is making sure that I get the contacts totally clean.
Well if any are going we could have a small project.
Would it be better to do at thew house? I heard it was a simpple process. Do I really need to take the back of the computer off in order to clean the contacts properly?
Senior Member
Joined: Jan 2000
Posts: 711
Likes: 0
From: Coal Valley,IL
LSTORM,
Taking the back of the computer off is really the only way to clean the contacts properly. You will see what I mean when you get it out. It takes only a couple of minutes and is not rocket science at all.
You will not believe the difference in performance!!! Good luck.
Later,
Jake...
Tools needed: 10mm socket & ratchet, phillips screwdriver, (the one that looks like a plus sign '+') j/k
, fine sandpaper or small stainless steel brush, contact cleaner spray.
------------------
2000 Black Lightning
NLOC #476
PSP full meal deal
Level 10 shift kit
SnugLid
BedRug
Wet Okole seat covers
AIM 2" rear drop
13.870 @ 100.52 stock
jacobs@revealed.net
[This message has been edited by Baby Jake (edited 07-11-2000).]
[This message has been edited by Baby Jake (edited 07-11-2000).]
Taking the back of the computer off is really the only way to clean the contacts properly. You will see what I mean when you get it out. It takes only a couple of minutes and is not rocket science at all.
You will not believe the difference in performance!!! Good luck.
Later,
Jake...
Tools needed: 10mm socket & ratchet, phillips screwdriver, (the one that looks like a plus sign '+') j/k
, fine sandpaper or small stainless steel brush, contact cleaner spray.------------------
2000 Black Lightning
NLOC #476
PSP full meal deal
Level 10 shift kit
SnugLid
BedRug
Wet Okole seat covers
AIM 2" rear drop
13.870 @ 100.52 stock
jacobs@revealed.net
[This message has been edited by Baby Jake (edited 07-11-2000).]
[This message has been edited by Baby Jake (edited 07-11-2000).]
