Everyone,

I finally got the front components in. I went with MB Quart 5 1/4 separates. The install was pretty straight forward, all items fit in the factory location with only a 1/4" wooden adapter.



The crossover fits convienently on the lower part of the door like:



I covered the tweeters and angled mounting bracket in black lycra tights. Hey, it matches perfectly and holds up good. I just think it looks a little more stealth than the metal tweeter cover for everyone to see.



NOTE: You must be very careful when cutting the tweeter hole. Don't cut too low, or you will cut the plastic mounting ear. Its hard to get a good flus mount because the triangle piece at the top is curved and angled.

Also, if you have doubts about cutting wood or a little metal from your door, have it installed.

Anyway, it sounds another 100% better. You cant beat the seperation of the highs. For those that that haven't ever experienced a good set of components, check em out and do it!!!

Later


------------------
Brian K
kimmel_brian@prc.com
thedink@ix.netcom.com

99.5 Black - Born 5/17/99

• Tinted Windows
• PSP Intake
• Clear Corners
• Autometer "Phantom" Boost Gauge
• SuperChip "FlipChip"
• Bedrug
• Alpine Audio w/MB Quarts all around
• Tow Package
• Mobil 1

93 Black Daily Driver:

• Bolt ons & Faded Paint

 

I like the mb quarts, but they're too bright for me. So I went with the polk dx 6.5s, I mounted my tweeters in teh stock location also, so it's completely unseen, cept the deck, and digital eq. Can't wait to finish my system here in a month or 2 kicker L7s, xtant amps. Can't wait

------------------
Floyd91
Why do I do the things that I do? Because, The chicks dig it!
99.5 White lightning
#2349 Born on 6/14/99

Clear Corners
Clear Tail lights
APC Ultra White headlights
PIAA Super White Driving lights
PSP Filter Kit
BellTech 3/4 drop

Razo carbon Race Pedals
Racing Trendz!