I am wanting to order my AIM 2" drop today.

Will someone supply me with the correct part numbers? I have seen a few posts where they were sending the wrong parts.

Where can I get the parts for the best price?

Thanks in advance.

 

Try:

https://www.f150online.com/f150board...ML/002266.html

The correct part number is SHA-FO-9700A. Cost is about $45.00.

------------------
2000 Red Lightning Born 3-8-00 / Delivered 3-22-00
22% Window Tint, Clear Corners, MPulse LoPro Tonneau, AIM 2" Drop Shackles

'99 Yukon Denali - Silver, Lowered 1", Borbet CW4's, 285/60R18 Toyo Proxes S/T's, Hotchkis AntiSways, Edelbrock Shocks

2000 Red Trans Am Ram Air WS6, 6 Speed - Delivered 2-15-00 - Awesome Looking Car

 

(L)AIM is terrible. Very poor customer service, almost every1 will agree to that. I would look for another company

 

Does anyone have the DJM 1" or 2" drop shackles installed? Any pictures or comments?

 

AIM had mine here in less than 4 days no problems.

 

yup bad service.....i opted for the belltech myself.

------------------
99.5 Lightning(white)
Best 1/4 mile:13.89 @ 98.1 mph, 60':2.02(stock)
ARE LSII Tonneau w/wing
Alpine Stereo System(400 Watts)
clear turn lenses/clear tail lenses(on order)
Phantom Boost Guage
AirRaid Filter Kit
PSP Chip(installed)
3.73 Gears(arrived)
Belltech 2" Drop Shackles

 

FYI, in case anyone is looking for installation instructions & photos of the AIM drop shackle kit, check out my website http://www.fordf150.net

I haven't installed these, but a fellow F150Onliner contributed the article.


------------------
1998 F-150 XLT 4x4 SC/SB 4.6L, Auto., 3.55LS, TTP, blah, blah, blah
All the info is at http://www.fordf150.net
Now with How-To Articles!

 

I have DJM drop shackles, the "2 inch drop" resulting in a 1 1/4 inch drop.

 

2000Silverbulletonorder thank you for the DJM pictures and info. I would like to lower the back about 1 1/4" so I will use the 2" drop.
I ordered them yesterday, so I should have by the weekend.