Removing tow assembly
Removing tow assembly
Just wanted to know how much it would raise the rear up if I removed it. I currently have an 01 w/ 2in shackles and removed leaf. I sell the suckers and they weigh alot so I figured if I removed it might raise the back up an inch.
I did measure the height differance. Removing the rear hitch raises the rear 3/8" to 1/2" as measured from the rear tire to the fender lip.
Removing the spare and spare winch raises it abotu the same amount.
Rich
Removing the spare and spare winch raises it abotu the same amount.
Rich
Originally Posted by wydopnthrtl
I did measure the height differance. Removing the rear hitch raises the rear 3/8" to 1/2" as measured from the rear tire to the fender lip.
Removing the spare and spare winch raises it about the same amount.
Rich
Removing the spare and spare winch raises it about the same amount.
Rich
The leafs are 180 lbs/in. Assume that all of the weight is carried by the rear springs. Removing a 45 lb hitch should raise it .25". Removing the 68 lb. spare and winch should raise it .38". So the total lift calculates to .63", which is about 5/8", just below the lower limit of 3/4" predicted by your measurements.
Trending Topics
Originally Posted by Tim Skelton
As an engineer, you should appreciate some math:
The leafs are 180 lbs/in. Assume that all of the weight is carried by the rear springs. Removing a 45 lb hitch should raise it .25". Removing the 68 lb. spare and winch should raise it .38". So the total lift calculates to .63", which is about 5/8", just below the lower limit of 3/4" predicted by your measurements.
The leafs are 180 lbs/in. Assume that all of the weight is carried by the rear springs. Removing a 45 lb hitch should raise it .25". Removing the 68 lb. spare and winch should raise it .38". So the total lift calculates to .63", which is about 5/8", just below the lower limit of 3/4" predicted by your measurements.
Originally Posted by MAT2CH
Not to sound like I'm trying to give you crap, but are you really an engineer?
Last edited by Sharpshooter; Apr 23, 2006 at 01:53 PM.



!!!!!