its by the power dist box (PDB). It has black wrapped wires coming out of the PDB and goes into this approx 3"x3" box and its just hanging by the wire bundle, resting on the ABS controller. I can't figure out where its supposed to be mounted. It just kinda flops around, this cant be right.

Also noticed my MAF wiring was hanging real loose and low. I found a push plug on the wire and connected it on the airbox lower mount, aft of the filter. Fit perfect now the wire is not in danger of hitting the fan and cylinder head.

------------------
Red 2000 SVT Lightning with Leer Lo-Rider Bed Cover, K&N Filter
Adopted 3/29/00
Silver 1998 Mustang GT Convertible (to many mods to list)

 

It mounts on the side of the PDB, between it and the master cylinder. Look on the side of the PDB closest to the master cylinder and you will see the tab that it snaps onto.

 

Thanks Hawkeye, you hit the nail right on the head......

------------------
Red 2000 SVT Lightning with Leer Lo-Rider Bed Cover, K&N Filter
Adopted 3/29/00
Silver 1998 Mustang GT Convertible (to many mods to list)

 

You're welcome, glad I could help.

[This message has been edited by Hawkeye (edited 05-13-2000).]