Lightning

Help on truck mods

Thread Tools
 
Search this Thread
 
Old Dec 13, 2005 | 12:52 PM
  #1  
son101's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2005
Posts: 4
Likes: 0
Help on truck mods

Hey guys, you guys helped alot on the last post I made. Appreciate it.

My two questions are: How fast or what am I capable of running with my
current setup? (Modifications listed below)

And also, is there anything I could add/change as
far as setup or mods go to get me into the high 11's?


Dyno Tune Information: First run (without juice)- 388/489
Second run (on hot motor, 75 shot)- 440/580

Modifications: Stock eaton S/C, 4 lb., M.A.C. cai, Tune from JDM, traction
bars, ftvb, and also have a pair of et sreets to use at the track
NX Gen2 wet kit (75 shot jets).

Thanks for all the help guys.
 
Reply
Old Dec 13, 2005 | 02:34 PM
  #2  
soap's Avatar
Senior Member
Joined: Sep 2001
Posts: 4,342
Likes: 0
From: Motor City
You should be right at a 11.9-12.0

--Joe
 
Reply
Old Dec 13, 2005 | 03:34 PM
  #3  
Redlightn 02's Avatar
Senior Member
Joined: Jan 2004
Posts: 920
Likes: 0
From: Miami Florida/Lighting Capital
You should be close. Did you change out the stock spark plugs to a colder one? You could port the eaton and that should do it.
 
Reply
Old Dec 13, 2005 | 05:07 PM
  #4  
son101's Avatar
Thread Starter
|
Junior Member
Joined: Dec 2005
Posts: 4
Likes: 0
is ported eaton too much hp

If I did port the eaton, would that be too much hp? Don't want to blow me engine but just making sure it would be ok (ported eaton+4lb+75 shot). Thanks guys.
 
Reply




All times are GMT -4. The time now is 12:14 AM.