OK, I'll be the first jerk!

How bout the Cheesegrater?

I actually do like it alot, and am considering it, but looking at the top, my first impresion was to get a fresh stick of Romano cheese!

 

i will be the second do (chickens have ears)

 

The air filter boxes are in the process of waiting to be made, so is the air scoop. Once they start manufacturing them it won't be long at all. I'll dare to say two weeks now, and hopefully sooner.

All of the kinks have been worked out on the air box but we're waiting on one special tool that has to be made. It normally takes a two to three days to have a tool made.

The air scoop design is finalized, all that's left is for me to inspect it and give them the go-ahead and I will do that tomorrow morning. The scoop will be stainless steel with a 3" stainless pipe coming out of the top rear. The reason for using stainless is to prevent the rock chip problems that would occur with a powder coated scoop, not to mention rust.

The bracket that holds the scoop will be stainless also. The entire scoop unit will be TIG welded together and will be held in place with two bolts.

NASCAR's finest brake cooling hose (there are 3 different grades) will be used with the kit and it'll be 3" diameter, 4" proved to be impossible, but you will get a true 3" diameter inlet and hose, not like the plastic units that I see all the time that measure 2.780".

We're more than excited to see this come to the market soon!!

Thanks,

Tim @ Chickenears.com

 

Yes, but they are tough and not very filling.

Andy@*>

 

 

i'll take some "COLD CHIKEN" when it's ready!!

 

Hey Tim... Will we have more clearance that the JLP under bumper scoop or not?

 

"the Chicken Feed"

and when pepole see other in takes they will say,,,,,that aint no chicken feed

 

Close it up......Chickintake Cold Air System.

 

What's the latest????

Update us!

 

So long as its not the dreaded "2 weeks"

Doug

 

They are built and being powdercoated today!!! Very soon they will be available.

Thanks for keeping the thread alive!

Tim

 

Lets all agree that sheet metal intake boxes weren't invented for the Gen 1 or Gen 2 lightning by any of the vendors here.

PSP may have been first to market with an Airfilter kit for Gen2s and My old truck had one but it didn't have a box around it. But being first to market isn't the same as designer - Sheet metal filter boxes have been around a long time.

Doug