i have a 01 lightning that i have to change the frame (oak tree bite)
have new frame at the powder coaters
looking for detailed cab removal seqence
I saw on one of tim's post a bare frame
mitch

 

I don't have a step by step but it is very easy. Only like 6 bolts that hold the cab on.

 

try this, http://flatratetech.com/images/nav_how_to.htm it will get you in the right direction!

 

nice move on powdercoating. much better than the ford undercoating goo.

 

thks I found that once but couln't find it again when I needed it
mitch

 

That sight will give you the basics you will have to do something with the intercooler plumbing, pump wiring and fuel pump resistor. You may have to check for additional grounds or wires, but most of the truck platforms are the same. I saw that and put it away just for info glad that it may help with you're project.

 

ford under coating crap is giving my powder coater fits
blasted frame then put in oven
goo seaps out of the bracket seams
work on his third go around at blasting it
mitch