Lightning

Warrenty!!!

Old Sep 7, 2005 | 08:43 PM
  #1  
halflife's Avatar
Thread Starter
|
Senior Member
Joined: Sep 2003
Posts: 2,454
Likes: 0
From: NY
Warrenty!!!

got myself a brand new torneau cover under ford warranty. I cracked one of the corner connectors. took it to ford to buy the part and the guy said I can replace the part under warranty. Well I decided to go all out and complain about how much the torneau sucked (it will not close is all sections) and it keeps opening up on the highway, etc..... I am friends with the service writer and he made it happen. Well that is about as far as I would let Ford work on my truck but I have had some good luck with Ford warranty work over the last few years.

Said thing is I roll in 7:15am Saturday morning so I am first in and do not waste my labor day weekend at Ford. Sitting there for about an hour, getting bored I start walking around the service parking lot checking out a bunch for ff250's and f350's, walk around the corner and there is my L. My friend in the bed freakin putting together the torneau cover. The tech gave up on it and could not figure it out, so the service writer was doing it So i walked over and helped him and we banged it out in like 10 minutes. finished up and realized that he forgot to put the 4 rubber pads in each corner. Told him forget it I would do it later. I did it the next morning, 20 minutes I had the entire cover and brackets off, padded and reassembled. And to think I was letting a Ford certified tech work on my car.
 
Reply
Old Sep 7, 2005 | 09:09 PM
  #2  
l-menace's Avatar
Senior Member
Joined: Jan 2003
Posts: 5,097
Likes: 0
From: DETROIT, (formerly Eaton County, Michigan)
Money!
 
Reply
Old Sep 7, 2005 | 09:45 PM
  #3  
meansvt00's Avatar
Senior Member
Joined: Jun 2005
Posts: 206
Likes: 0
From: New Jersey
now thats funny
 
Reply
Old Sep 8, 2005 | 06:23 PM
  #4  
SVT_KY's Avatar
Senior Member
Joined: Feb 2002
Posts: 4,922
Likes: 1
From: Lexington, KY
The factory Ford tonneau cover is one of THE best
designed pieces I have evar seen. I have had mine
replaced twice due to minor issues with the back corners
not laying flat, and the third one had a bigger plastic lip
on the cover that works great ... It has nevar come off
even at 150+ mph ...
 
Reply
Old Sep 8, 2005 | 09:07 PM
  #5  
Blown93's Avatar
Senior Member
Joined: Dec 2001
Posts: 2,527
Likes: 0
From: Here
How about a part number for one..

PEacE.................
Jim
 
Reply
Old Sep 9, 2005 | 10:53 AM
  #6  
blown330's Avatar
Senior Member
Joined: Mar 2004
Posts: 120
Likes: 0
yes, please! someone post a part # please! some a-hole slashed my cover, and the ford parts guy has ordered me three different covers and all of them have been the most ugly covers i have ever seen!
 
Reply
Old Sep 10, 2005 | 09:33 PM
  #7  
Blown93's Avatar
Senior Member
Joined: Dec 2001
Posts: 2,527
Likes: 0
From: Here
ttt
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:10 AM.