Did I read that right on the spindle? You have to use 18" or larger wheels with these spindles? That means no drag wheels for the front?

 

yeah your correct, crap i did not even think of that.

 

***...back to plan B
was just thinking about buying the spindles, but i also want to get slicks and skinnies for my truck after the major mod revamp is done.

time to find lower springs again

 

I am sure there is some 18 in ones out there or possibly custom. does not matter much to me as i will probably on be at the track once or twice a year and will probably just be with my 22's on the front and slicks in the rear.

The overall quality looks great. Probably will be a month before I have time to install them

 

very cool

 

Thanks for showing us the pics
Now we need a install and comments.
What amount of drop do they give?

 

2 inch

 

Hopefully I'll get mine before this weekend so I can install them right away. Looks good.

 

I want to install them this weekend but I need to buy some air tools to install the front hangers for the rear. so i have to wait a few weeks.

any NY guys with airtools have some free time this weekend

 

You're also going to need a couple of guys to help you remove that bed.... ... and C-Notches? Even more fun! Figure a full weekend for C-Notches and Hangers

 

how much did they run you????

im thinking about running some drag springs in the front, and running them with my 2 inch drop control arms, to keep my same height, but have the nice soft springs up front...

im against using them for just lowering your truck 2 inches, i would rather go with the control arms, but using them both with a stock height spring would be key!

 

i was hoping not to have to C notch. I am going to be running front hangers and 2in drop shackles, so i am guessing a 4 inch drop and hope with the shorter bump stops I will be good.

 

i think about 250, can not remember. bought them from summit

 

Damn Tom ,Pick me some money from the money tree. Truck looks great cant wait to see it dropped.