Belltech Drop spindles pics
|
Did I read that right on the spindle? You have to use 18" or larger wheels with these spindles? That means no drag wheels for the front?
|
Originally Posted by JUSTNLX
Did I read that right on the spindle? You have to use 18" or larger wheels with these spindles? That means no drag wheels for the front?
|
fuk...back to plan B :lol:
was just thinking about buying the spindles, but i also want to get slicks and skinnies for my truck after the major mod revamp is done. time to find lower springs again :devil: |
Originally Posted by Harley#356
fuk...back to plan B :lol:
was just thinking about buying the spindles, but i also want to get slicks and skinnies for my truck after the major mod revamp is done. time to find lower springs again :devil: The overall quality looks great. Probably will be a month before I have time to install them |
very cool
|
Thanks for showing us the pics :thumbsup:
Now we need a install and comments. What amount of drop do they give? |
2 inch
|
Hopefully I'll get mine before this weekend so I can install them right away. Looks good.
|
I want to install them this weekend but I need to buy some air tools to install the front hangers for the rear. so i have to wait a few weeks.
any NY guys with airtools have some free time this weekend :D |
You're also going to need a couple of guys to help you remove that bed.... :) ... and C-Notches? Even more fun! Figure a full weekend for C-Notches and Hangers ;)
|
how much did they run you????
im thinking about running some drag springs in the front, and running them with my 2 inch drop control arms, to keep my same height, but have the nice soft springs up front... im against using them for just lowering your truck 2 inches, i would rather go with the control arms, but using them both with a stock height spring would be key! |
Originally Posted by mecca
You're also going to need a couple of guys to help you remove that bed.... :) ... and C-Notches? Even more fun! Figure a full weekend for C-Notches and Hangers ;)
i was hoping not to have to C notch. I am going to be running front hangers and 2in drop shackles, so i am guessing a 4 inch drop and hope with the shorter bump stops I will be good. |
Originally Posted by PittsburghSvt
how much did they run you????
im thinking about running some drag springs in the front, and running them with my 2 inch drop control arms, to keep my same height, but have the nice soft springs up front... im against using them for just lowering your truck 2 inches, i would rather go with the control arms, but using them both with a stock height spring would be key! |
Damn Tom ,Pick me some money from the money tree. :lol: Truck looks great cant wait to see it dropped.
|
All times are GMT -4. The time now is 12:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands