Truck is totally stock
4000 km
Wanted a baseline b4 modding

I think I could have gotten a little more torque, but they had a few downshifts to second during the runs, so they didn't get into it as early as I would have liked.

3 runs total... all within 2 hp / ft/lbs of each other

Here are the numbers from the last run:



355hp
425.5 ft/lbs

Let the modding begin

 

i would have guessed 325-345 rwhp! pretty close considering conditions,correction factors...ect.. JL

 

Those are about the same #'s as my '04 got stock. These trucks rule!

 

right on with my stock '04 numbers (356rwhp & 427rwtq)

 

looks alot like mine stock! congrats, and let the mods begin!



-Mike

 

The 01-04s usually average about 345-350 SAE. Your numbers are STD, which will read a little higher, so it sounds right on the money to me.

 

This is the first time I see a stock 04's dyno results. I have never seen such a flat A/F line from 3500 to 5400 rpms at 12:1. Obviously the programming in the PCM is different. There is allot of reliability built in these vehicles right from the factory.

TB