Is it a two man job only, or can you wrestle it out yourself?

Thanks...... Joel

 

I was able to do it .. But be careful the metal legs dont scrape anything on the way out...

I would go for 2 people if I had that option ....

 

My 180 pound self has done it a couple of times. Not that bad; just gotta be ready and fold it down helps.

 

Cool, Thanks Doug and Casey!

 

It weighs about 70-75 pounds.

 

Where can I get the tool needed to remove it?

Thanks,
Jello

 

any tool store, its a torx-bit

 

It is a bear! And be carefull when going through the door opening. It's really easy to drag one of the feet against the paint or door panel.

Rich

 

I did it and im a little guy.

 

i have done it a couple times myself, but i fell much more comfortable doing it with some help. i would hate to scratch the truck or door panel

 

I did it myself too... It was a bit awkward by myself tho. If I had to do it again, I'd get help.

 

It helps a bit to pull your floor mat over so it hangs out of the door a little. Helps to keep from scratching things up.

Jason

 

A torx bit from NAPA for like 6 dollars. It is easy to remove.The toughest thing is getting the seat belts out....I have thought about leaving it out.But I know as soon as I do that I will have a friend need a ride somewhere or something will happen that will make me put the seat back in...

 

your alive?!?!



and the seat isn't to hard to get out.... its just bulky.......

 

GET SOME HELP.

I screwed my back up removing mine.

I now have the bucket seet mod.
It is much lighter and easier to remove.

You need a 55 torx bit to remove it.