Belt slip? Or something worse?
Originally posted by ByByBird
Udate: I'll make it short. During my trans install my buddy must have installed the inspection plate on backwards. It pushing/hitting the tq convertor bolts under hard loads.
I figured that it did not start making the noise untill after the trans install so I went back over all the stuff that was easy to check. That's how I discovered it.
Udate: I'll make it short. During my trans install my buddy must have installed the inspection plate on backwards. It pushing/hitting the tq convertor bolts under hard loads.
I figured that it did not start making the noise untill after the trans install so I went back over all the stuff that was easy to check. That's how I discovered it.


