Lightning

Got Dyno!!!

Old Oct 18, 2004 | 01:51 PM
  #1  
brahmus's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2003
Posts: 2,066
Likes: 0
From: Delcambre, La
Got Dyno!!!



What do you guys think?? this is with no cool down! I'd like to be in the 400/500 club so some tweaking will come. Accufab S/B? here is what i have so far.

2001 blower setup
2004 L stock motor
Apten port
4lb lower
volant intake
efan
dynatech longtubes/midpipes to true duals
I'm seeing about 11psi on the gauge

Well let it rip, suggestions and comments welcome!!
 
Reply
Old Oct 18, 2004 | 04:25 PM
  #2  
B-Man's Avatar
Senior Member
Joined: Dec 2002
Posts: 1,558
Likes: 3
From: Eastern TN
Cool

Get with Sal for a tune !!!
 
Reply
Old Oct 18, 2004 | 05:03 PM
  #3  
Stl01SVT's Avatar
Senior Member
Joined: Dec 2003
Posts: 624
Likes: 0
From: O'Fallon, MO
Dyno Tune

With basically the same mods - the long tubes, I pulled 414/503.

Were these runs done on a Mustang dyno. If not, you are in desperate need of a good tune.
 
Reply
Old Oct 18, 2004 | 05:04 PM
  #4  
03WHITELIGHTNIN's Avatar
Senior Member
Joined: Feb 2004
Posts: 505
Likes: 0
From: N.C.
Originally posted by B-Man
Get with Sal for a tune !!!
I agree

I am assuming this is with a stock pcm. anyways that a/f is all f*cked up.

later
brian
 
Reply
Old Oct 18, 2004 | 05:26 PM
  #5  
brahmus's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2003
Posts: 2,066
Likes: 0
From: Delcambre, La
lets not overlook the fact that this is in a 6000lb supercrew 4x4 with 35" tires, 4.56 gears and the 4r70w tranny! The chip is a SCT mailorder from apten and burnt to work with the N/A 5.4 pcm. I plan on getting intouch with Sal to see if he can help me. None of the dynos here have SCT tuning capabilities! OH the pulls were on a dynojet dyno.

stl01svt, are those SAE #s? just curious, i wanted some #s to compare my losses through my drive train to. How much boost are you seeing? I figure the longtubes are dropping boost some.

Thanks for the replies guys!
 
Reply
Old Oct 18, 2004 | 05:30 PM
  #6  
Stl01SVT's Avatar
Senior Member
Joined: Dec 2003
Posts: 624
Likes: 0
From: O'Fallon, MO
stl01svt, are those SAE #s?
Yes.
 
Reply
Old Oct 18, 2004 | 05:48 PM
  #7  
birdy111's Avatar
Senior Member
Joined: Jun 2004
Posts: 856
Likes: 0
From: Oregon
am i the only one that thinks you should be seeing more than 11 pounds of boost with a 4lb lower and the port? dont people usually see about 14-15 with the apetn port+4lb lower?? And wouldn't the long tubes only reduce boost by about a pound?
 
Reply

Trending Topics

Old Oct 18, 2004 | 10:59 PM
  #8  
brahmus's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2003
Posts: 2,066
Likes: 0
From: Delcambre, La
I thought the same thing but where would i be losing boost? everything is buttoned up tight and running wonderfully except for the slightly rich condition. It might be more like 12 towards the higher rpm but when i do visit that end of the tach my eyes are elsewhere and i couldn't watch the boost gauge when it was on the dyno. So i figured the Longtubes cancel anything that the port increased. Am i thinking correctly? The morning of the dyno was the first day since i have had the truck together that it has been below 70F! it is hot and humid here (south Louisiana, Extremely south)!!!!!
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:06 PM.