Ported Blower Results
Thread Starter
|
Member
Joined: Oct 2004
Posts: 29
Likes: 0
From: Delaware
Ported Blower Results
Prior to blower porting the numbers were 392rwhp/506rwtq on 93 octane with the following mods:
JLP 5# Lower
JLP Custom Predator Tune
Metco Idler Bracket
Accufab TB
AirForceOne Intake
Magnaflow Catback
NGK TR7-IX
The only change I made was the blower porting by Stiegemeier(aka Apten), I was going to make some changes in the Predator, but since it was a dyno day and it was late, I wasn't able to. Also this was on pure 93 octane and the results were 422rwhp/514rwtq SAE.
JLP 5# Lower
JLP Custom Predator Tune
Metco Idler Bracket
Accufab TB
AirForceOne Intake
Magnaflow Catback
NGK TR7-IX
The only change I made was the blower porting by Stiegemeier(aka Apten), I was going to make some changes in the Predator, but since it was a dyno day and it was late, I wasn't able to. Also this was on pure 93 octane and the results were 422rwhp/514rwtq SAE.
Senior Member
Joined: May 2004
Posts: 479
Likes: 0
Peak numbers look great but compared to my dyno chart it looks like you take a HUGE plunge in tq after 4,200rpms.
I'd figure it'd be a little smoother then that and maybe not so great of a loss. Take it to the track and let those #s do the talking!!
I'd figure it'd be a little smoother then that and maybe not so great of a loss. Take it to the track and let those #s do the talking!!