Lightning

Uneven truck

Thread Tools
 
Search this Thread
 
Old Oct 12, 2004 | 01:45 PM
  #1  
FunFord's Avatar
Thread Starter
|
Registered User
Joined: Jul 2004
Posts: 572
Likes: 0
From: Buford, Ga
Uneven truck

I lowered my truck with the Ground Force 1-2'' kit, about a week and a half ago. The truck set perfectly level in the back and was 1/8'' of and inch off in the front which I was very happy with. Now after some hard and fast driving it is 1/4'' lower on the drivers front side, than the passenger side. The back passengers side is 1/4'' higher than the drivers side. Is this off enough to cause problems? Should I be worried, or just live with it?
Thanks!
 
Reply
Old Oct 12, 2004 | 02:24 PM
  #2  
kerno's Avatar
Senior Member
Joined: Feb 2003
Posts: 413
Likes: 0
From: Kihei, HI (most of the time)
The ride height difference you've got won't hurt a thing. If it gets too annoying to look at, put a 1/4 inch shim between the axle hopusing and the spring pack on the low side. A piece of steel flat bar will work just fine, but you'll need a 3/8 hole in the middle of it so you can put the spring bolt through it. That spring bolt locates the axle in the truck, so the head has to stick up above the shim.
 
Reply
Old Oct 12, 2004 | 10:09 PM
  #3  
FunFord's Avatar
Thread Starter
|
Registered User
Joined: Jul 2004
Posts: 572
Likes: 0
From: Buford, Ga
ttt
 
Reply




All times are GMT -4. The time now is 07:01 PM.