phun phun
Thread Starter
|
Member
Joined: Aug 2004
Posts: 37
Likes: 0
From: NH
phun phun
does anyone have any ideas to easily give more power to the lightning at a low cost... i just raced off the light and it was a little to close for me, idunno i just need to do more to it to make it faster
Thread Starter
|
Member
Joined: Aug 2004
Posts: 37
Likes: 0
From: NH
ive got nothin done...it bone stock...just im kinda short on $$$ because of having to buy tools for werk...
it was a WRX STI...i think it was too close...he was like almost next to me...i didnt like it at all...
i need to make it faster!!!
it was a WRX STI...i think it was too close...he was like almost next to me...i didnt like it at all...
i need to make it faster!!!
Senior Member
Joined: Oct 2002
Posts: 896
Likes: 0
From: San Diego, CA
Trending Topics
Member
Joined: Aug 2004
Posts: 29
Likes: 0
From: FL
a wrx sti is lite'er and is turbo and has awd so it could take you pretty close a specialy if he has a stix it going to be super close
hears the specs on 2004
2.5L boxer DOHC 4cylinder, 16 valve
Turbocharged, high-boost, IHI Brand
Enlarged Air-Intake Hood scoop with Water-Sprayed intercooler: manually operated hood-scoop water sprayer provides additional cooling to the intercooler
Drive-by-wire throttle
Aluminum alloy pistons
Cast iron cylinder liners
Reinforced "semi-closed deck" alloy block
Forged high-carbon steel connecting rods
Resin composite intake manifold
Electronic Drive by Wire throttle
Bore: 99.5 x 79mm, 3.92 x 3.11"
300hp@6000 rpm horse power, 300ft torque@4000rpm
hears the specs on 2004
2.5L boxer DOHC 4cylinder, 16 valve
Turbocharged, high-boost, IHI Brand
Enlarged Air-Intake Hood scoop with Water-Sprayed intercooler: manually operated hood-scoop water sprayer provides additional cooling to the intercooler
Drive-by-wire throttle
Aluminum alloy pistons
Cast iron cylinder liners
Reinforced "semi-closed deck" alloy block
Forged high-carbon steel connecting rods
Resin composite intake manifold
Electronic Drive by Wire throttle
Bore: 99.5 x 79mm, 3.92 x 3.11"
300hp@6000 rpm horse power, 300ft torque@4000rpm
Thread Starter
|
Member
Joined: Aug 2004
Posts: 37
Likes: 0
From: NH
the thing is im kinda tight on money at the moment...according to werk i get a raise in the next week or so...but its still part time because of school!!! and tight on time...the time thing is easier to werk with than the money right now....
Senior Member
Joined: Jan 2004
Posts: 920
Likes: 0
From: Miami Florida/Lighting Capital
Originally posted by 04blacklighting
ive got nothin done...it bone stock...just im kinda short on $$$ because of having to buy tools for werk...
it was a WRX STI...i think it was too close...he was like almost next to me...i didnt like it at all...
i need to make it faster!!!
ive got nothin done...it bone stock...just im kinda short on $$$ because of having to buy tools for werk...
it was a WRX STI...i think it was too close...he was like almost next to me...i didnt like it at all...
i need to make it faster!!!
if that was really the 300hp STI and not just the 227hp wrx. The STI's are really quick on take off (all wheel drive), 0-60 in 4.8 seconds and tops out at 155mph.
Thread Starter
|
Member
Joined: Aug 2004
Posts: 37
Likes: 0
From: NH
i know it was a STI bc i see it like every day going to werk...just today i saw it on my way home from werk...yeah he stayed behind me till we hit the next light and i got stuck with the line and he got the short line and you could see the "STI" on the back... but for me its too close...
