Eaton Snout Parts and Info.
Thread Starter
|
Senior Member
Joined: Oct 2002
Posts: 2,840
Likes: 0
From: Bridgeport, MI
Originally posted by JeffsLightning
How hard is it to remove the front blower snout from the 2 rotors? Can it be done with the blower still on the L?
How hard is it to remove the front blower snout from the 2 rotors? Can it be done with the blower still on the L?
Then take the supercharger belt off.
Remove the bolt that hold the snout on the supercharger body.
If you look on the bottom corners of the supercharger you will see there is areas to pry the snout plate off and there is also pry areas to remove the rotor pack. Just remember to hone the mating surfaces before you put it back together. Also use some sensor friendly silocone sealer.
Suavy
Senior Member
Joined: Oct 2000
Posts: 507
Likes: 0
From: " Somewhere Between Lost & Found "
Originally posted by Suavy
Denso's, I tried them twice and fried them twice. truck never ran right with them.
Tell someone I said Hi
Suavy
Denso's, I tried them twice and fried them twice. truck never ran right with them.
Tell someone I said Hi
Suavy
Last edited by SMOKINTRUCK#1; Aug 9, 2004 at 09:29 AM.
Senior Member
Joined: Jan 2003
Posts: 5,097
Likes: 0
From: DETROIT, (formerly Eaton County, Michigan)
Originally posted by SMOKINTRUCK#1
Thanx Suavy ! That would be I-Menace .
Thanx Suavy ! That would be I-Menace .
Suavy I dropped off those parts last night (sunday) at your house.
Thread Starter
|
Senior Member
Joined: Oct 2002
Posts: 2,840
Likes: 0
From: Bridgeport, MI
Originally posted by SMOKINTRUCK#1
Thanx Suavy ! That would be I-Menace .
Thanx Suavy ! That would be I-Menace .
Menace, thanks for the plugs!
My man menace gave the suavster a set of TR-6"s since my denso's got trashed again.
Suavy
what idots are you talking about?
Thread Starter
|
Senior Member
Joined: Oct 2002
Posts: 2,840
Likes: 0
From: Bridgeport, MI
Originally posted by promodlightning
Suavy, can you fix snouts? I have one that some idiots broke the bolt of the pulley remover in. It may need a new shaft, but Id like to have it fixed. Pete
Suavy, can you fix snouts? I have one that some idiots broke the bolt of the pulley remover in. It may need a new shaft, but Id like to have it fixed. Pete
Suavy