JLP's Air Induction Kit
Senior Member
Joined: Dec 2001
Posts: 567
Likes: 0
From: Hazel Park, MI
I noticed a little more power when we put it on the Wood. I hadn't been on a dyno (& don't have a boost gage) but I noticed a difference in my gas mileage (I gained about 1-2 miles per gallon).
I have the single tube set-up on the Wood & it does it. However Johnny looked at it when we took it to NMRA GA in April (since he had never seen it set up on a Wood) & he told me that Robert screwed it up to the wrong hole. Fast forward to several months later & we still haven't switched it. I've had it on for about a year now & have learned to not turn it too far over. We should have it switched by September tho.
Originally posted by l-menace
when you turn the wheel all the way to the right it rubs against the metal tube (I have an older dual ram air version, this is no longer a problem with his new setup)
when you turn the wheel all the way to the right it rubs against the metal tube (I have an older dual ram air version, this is no longer a problem with his new setup)
