I installed the Roush suspension today and love the way the truck looks. I know I need new sway bar end links but am unsure as to the size. Below is a picture of the sway bar with the stock end links installed. It looks parallel to the ground even though the front was lowered 1.75 - 2 inches. Should I just get end links 2 inches shorter or what.

https://www.f150online.com/galleries/pictureview.cfm?pnum=91326&anum=6071

There are other pictures in my gallery, suyspension gurus please check them out and help me out.


Thanks,
David
P.S. Can someone fix this stupid picture so it shows. Thanks.

 

 

The 2" drop shackles lowered the rear of my truck 1 1/2", so I cut and rewelded 1 1/2" off my sway bar end links.

Oh sorry, just reread your post. You are talking about the front of the truck.

 

 

It's actually cheaper than that. Just go get some some shorter grade 8 bolts and cut the sleeve. But that little bit of change will not make a big difference anyway.