I'm wanting one vendor who can provide me with two, possibly three or four parts at once (maybe save me some in shipping )

What I would like:
1. NGK br7's
2. 160 thermostat

and

3. some type of oil separator to keep my truck from consuming oil through the intake (not the dime mod please).

I would also be interested in the plentum extention too... Vendor's please e mail me if you can help.

 

Got my oil seperator from REM

They probably have the plugs and t-stat.

 

Whoa, stop right there! That's eight parts already...

 

Imagine what I'll pay for shipping!

Hey, by the way...

If anyone knows of a kit for the oil separator that *doesn't* actually uses an air compressor oil/air separator, but rather some one way vacum check valves PLEASE let me know. I've read and done so many 'searches' that my eyes hurt.

Thanks.

 

There is a huge write up from one of the mods about the pcv system on our trucks. So far, the only GOOD fix for the oil in the intake and plenum is an air/oil seperator. It can't be blocked off like with the dime mod or a functional pcv valve put in because under boost, the crankcase won't scavenge the dirty/contaminated air out into the plenum. You almost HAVE to use a compressor seperatoe to get the correct operation of the system and still remove the fine oil mist from the engine.