E-Fan Wiring Guru's ?
Thread Starter
|
Senior Member
Joined: Jul 1999
Posts: 1,642
Likes: 0
From: South East USA
E-Fan Wiring Guru's ?
Will this thermal sensor\switch work with
a 30 amp relay. Should I jusr wire one side to the relay and one side to ground....I have a used JDM E-Fan and don't have the sensor for this kit..If I tie one end of this sensor in the link to the JDM sensor wire and the other to ground would this serve the same purpose?
Thanks
http://www.jegs.com/cgi-bin/ncommerc...11&prmenbr=361
a 30 amp relay. Should I jusr wire one side to the relay and one side to ground....I have a used JDM E-Fan and don't have the sensor for this kit..If I tie one end of this sensor in the link to the JDM sensor wire and the other to ground would this serve the same purpose?
Thanks
http://www.jegs.com/cgi-bin/ncommerc...11&prmenbr=361
Last edited by Twisted99; Mar 20, 2004 at 07:25 PM.
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Do you have the wire harness that came with the E Fan, and is it the dual relay setup?? If so I would call Justin and ask him to send you a sensor that comes with the kit.
If not call him and ask him for a wiring harness kit for the fan.
You don't want to be messing with your cooling system, do it right and keep your truck safe.
If not call him and ask him for a wiring harness kit for the fan.
You don't want to be messing with your cooling system, do it right and keep your truck safe.
Thread Starter
|
Senior Member
Joined: Jul 1999
Posts: 1,642
Likes: 0
From: South East USA
Yes I have the dual relay setup...and the 40 amp breaker for the toggle on off...
I can run it in with the AC on till I sort this out....Cools fine this way..round 184 degrees....
I can run it in with the AC on till I sort this out....Cools fine this way..round 184 degrees....
