Lightning

Going to they dyno tomorrow...

Thread Tools
 
Search this Thread
 
Old Mar 10, 2004 | 12:08 AM
  #1  
denny0328's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2002
Posts: 896
Likes: 0
From: San Diego, CA
Question Going to they dyno tomorrow...

Well im finally making my first trip to the dyno tomorrow...

since ive never been before, are their any tips or tricks that i should know?

any if anyone wants to indulge me, im curious what i should expect, mods are:

4# lower
JLP predator
PSP fast air
FTVB
 
Reply
Old Mar 10, 2004 | 02:27 AM
  #2  
I8ACAMRO's Avatar
Senior Member
Joined: Jun 2002
Posts: 147
Likes: 0
From: CENTRAL CALIFORNIA
My guess would be 380- 390 RWHP and 470-480 RWTQ. It may
be better than that if weathter is cool. You are really going to enjoy the sound of your L at WOT with the hood up!

Where are you dynoing?
 
Reply
Old Mar 10, 2004 | 09:07 AM
  #3  
denny0328's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2002
Posts: 896
Likes: 0
From: San Diego, CA
Im going to JBA, hopefully the humidity will stay down, but i think its gonna get hot! should i get there a little early to give the block time to cool down?
 
Reply
Old Mar 10, 2004 | 09:10 AM
  #4  
RED 92's Avatar
Senior Member
Joined: Feb 2001
Posts: 1,394
Likes: 0
From: San Antonio
Make sure they take care in straping your truck down and that they have something to protect your front wheels (keep from scratching them) when they strap them down.

If you have a video camera take it. It will be the only time you will hear your truck at WOT from the outside and its nice to have a copy. I bet you see around 400/490.........
I pulled 400/493 with the same mods.


you can let it cool before you run.........
 
Reply
Old Mar 10, 2004 | 09:17 AM
  #5  
wydopnthrtl's Avatar
Senior Member
Joined: Oct 2001
Posts: 2,456
Likes: 1
From: SE Mich
Check the rear tire pressure & make sure they are at 33-32psi. Oh and I'd suggest putting a new fuel filter on as well.

Rich
 
Reply




All times are GMT -4. The time now is 04:25 PM.