Best spot or method to inject NOS?
Thread Starter
|
Senior Member
Joined: Oct 2001
Posts: 2,456
Likes: 1
From: SE Mich
Best spot or method to inject NOS?
I have this post going over at nloc and would like to have any and all info you'll can give.
http://www.nloc.net/forum/showthread...threadid=60514
Thanks, Rich
http://www.nloc.net/forum/showthread...threadid=60514
Thanks, Rich
Senior Member
Joined: May 2001
Posts: 3,300
Likes: 0
From: Richmond, VA, USA
I believe the best system from a distribution standpoint would be a direct port or "fogger" style system that used a spray bar running the length of the intake on each side or used a nozzle on each intake runner.
however, from what I have been able to gather, this isn't necessary on our trucks unless you are looking to use upwards of a 200HP shot of nitrous.
I talked to Nitrous Express about their NXL system at SEMA and they said that it wasn't necessary. they say that they've had great success with just the standard throttle body spray wet system. sal@psp has a nice plate for this application.
you might talk to sal, he made a custom intake with rails or bars made into it. It shouldn't be that hard to do. I bought an extra lower with the intention of doing something along those lines, but 150-200shot should be enough for me!
just my .02
later,
chris
however, from what I have been able to gather, this isn't necessary on our trucks unless you are looking to use upwards of a 200HP shot of nitrous.
I talked to Nitrous Express about their NXL system at SEMA and they said that it wasn't necessary. they say that they've had great success with just the standard throttle body spray wet system. sal@psp has a nice plate for this application.
you might talk to sal, he made a custom intake with rails or bars made into it. It shouldn't be that hard to do. I bought an extra lower with the intention of doing something along those lines, but 150-200shot should be enough for me!
just my .02
later,
chris
