Is REM porting Eatons???
LOL....Trying not to....But I have seen and know how hard this site can be to new comers!! You guys are a rough bunch and I am just trying to make the transition for ma HD owner to a L owner a smooth one!! But satisfying all of you is beginning to become quite a task!!!
I think the 25hp was with a 4lb lower on a Harleytruck in California with their crappy 91 octane oxygenated winter fuel................but I could be wrong.
We got 35rwhp and 16ftlbs of torque on a local Cobra with no additional tuning required.
We got 35rwhp and 16ftlbs of torque on a local Cobra with no additional tuning required.
Originally posted by VinniePSVT
This sounds like a good Xmas gift to give to myself.
This sounds like a good Xmas gift to give to myself.
But it's waaaaaaaaay too dam cold here in NY to be out there
taking things apart right now.
I may have to wait to spring
So how much does it run from Razor's Edge ?? 299 ?? and is it comparable to the port job apten does.
A buddy of mine got his ported by apten gained 30 rwhp by just swapping the blowers then he went from a 6lb lower to 8lb lower and gain another 25 so all in all he gained 55 rwhp by added 2 more lbs of boost and swapping the blowers. But the truck now shows 19 pis of boost on the autometer guage maybe a little too much for a stock shortblock!
Thanks
Brad00L
7.82 @ 87.24 1.67 60ft
A buddy of mine got his ported by apten gained 30 rwhp by just swapping the blowers then he went from a 6lb lower to 8lb lower and gain another 25 so all in all he gained 55 rwhp by added 2 more lbs of boost and swapping the blowers. But the truck now shows 19 pis of boost on the autometer guage maybe a little too much for a stock shortblock!
Thanks
Brad00L
7.82 @ 87.24 1.67 60ft
There is a guy here in Jasper that has a 10lb lower on a stock block with adiablo chip. He has already blown 2 motors up and Ford has payed for both of them. All us alabama guys need to meet up someday but i would probley be the slowest.
69Roadster : It's a guy at work. It's on a Harley Davidson truck. It made 43X rwhp after the ported blower and 8lb. Before he made only 375 rwhp with a 6lb lower, JLP air box and lightning upper pulley, and a very mild chip from JLP like on 14 deg timing!
yea 19psi is crazy boost ! Maybe it want blow it's his daily driver!
LatemodelRacer2: Yes it would nice to all meet up! I would probably be the slowest! I have the slowest one around are track now!
Brad
7.82 @ 87.24 1.67 60ft
yea 19psi is crazy boost ! Maybe it want blow it's his daily driver!
LatemodelRacer2: Yes it would nice to all meet up! I would probably be the slowest! I have the slowest one around are track now!
Brad
7.82 @ 87.24 1.67 60ft



lol